https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dl180-g9-array-problem/m-p/6780951#M150826 <P>Dear, I have a problem in a ProLiant DL180 G9 by HP SSA I do a RAID 5 with 3 disks of 2TB and tells me that one disk is bad, well, then I get rid RAID and then try to create a RAID1 with disks good (only 2) then I do all the procedure to create the RAID but when I "finish" ... shows no percentage discs (2 good) were tested on another computer and are good. that may be, help!</P> Thu, 03 Sep 2015 14:22:13 GMT marcelo_ramos 2015-09-03T14:22:13Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dl180-g9-array-problem/m-p/6780951#M150826 <P>Dear, I have a problem in a ProLiant DL180 G9 by HP SSA I do a RAID 5 with 3 disks of 2TB and tells me that one disk is bad, well, then I get rid RAID and then try to create a RAID1 with disks good (only 2) then I do all the procedure to create the RAID but when I "finish" ... shows no percentage discs (2 good) were tested on another computer and are good. that may be, help!</P> Thu, 03 Sep 2015 14:22:13 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dl180-g9-array-problem/m-p/6780951#M150826 marcelo_ramos 2015-09-03T14:22:13Z