https://community.hpe.com/t5/proliant-servers-ml-dl-sl/2sl-giving-error-26-may-have-a-disk-problem-rerun-acu/m-p/3060421#M150861 I have installed a 2-sl into cpq ml350 with raid 0+1 on 2 x 36g drives -When i boot from smart start to create partition etc. I get an error stating that the disk cannot be accessed , it may have a problem - cycle system power and run the ACU again - I have tested both drives and upgraded the rombios , to no avail .I also tried using the acu from the 532 cd as it's newer - smae problems <BR />Any help would be appreciated Sun, 31 Aug 2003 21:34:38 GMT tony doherty_2 2003-08-31T21:34:38Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/2sl-giving-error-26-may-have-a-disk-problem-rerun-acu/m-p/3060421#M150861 I have installed a 2-sl into cpq ml350 with raid 0+1 on 2 x 36g drives -When i boot from smart start to create partition etc. I get an error stating that the disk cannot be accessed , it may have a problem - cycle system power and run the ACU again - I have tested both drives and upgraded the rombios , to no avail .I also tried using the acu from the 532 cd as it's newer - smae problems <BR />Any help would be appreciated Sun, 31 Aug 2003 21:34:38 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/2sl-giving-error-26-may-have-a-disk-problem-rerun-acu/m-p/3060421#M150861 tony doherty_2 2003-08-31T21:34:38Z