topic Re: update dl380 g7 in HPE ProLiant Servers (ML,DL,SL)

update dl380 g7

Stefano-It — Wed, 17 Feb 2016 11:24:39 GMT

Hi everybody,

I'm new to HPE and therefore I'm in trouble with this specific issue. I've update my server DL380 G7 with bootable Smart update V2014.09. All update are done, but now , at boot the controller say that I need to update to HPDA disk firmware. Now I've check on my system and I've HPD5, and seem that pass directly from HPD5 to HPDA is not possible. On the system is installed vmware therefore I can't execute any windows executable. How can do this intermediate update?

Many thanks

Regards

Stefano

Re: update dl380 g7

Torsten. — Wed, 17 Feb 2016 11:32:26 GMT

>> seem that pass directly from HPD5 to HPDA is not possible

Why not?

Any message telling you that?

What is the disk model?

You may include this firmware into your SPP.

Re: update dl380 g7

Stefano-It — Wed, 17 Feb 2016 11:48:50 GMT

Hi Torsten,

Yes, SPP sw say this message , I can update only from HPD7 and later. Disk is EG0300FBDBR.

I don't know which is and how to add this update on the bootable usb.

Thanks

Re: update dl380 g7

Torsten. — Wed, 17 Feb 2016 11:56:24 GMT

Your old SPP 2014.09 has version HPDA in CP023176.scexe.

Here is HPD7

http://h20566.www2.hpe.com/hpsc/swd/public/detail?swItemId=MTX_680e003d18894befb083e50cea

place the CP017743.scexe file into hp/swpackages on your USB stick.

Boot interactive mode and check if this update is selected, then deploy.

Re: update dl380 g7

Stefano-It — Wed, 17 Feb 2016 12:02:56 GMT

thanks, Now I'll try and I'll say you the result.

Stefano

Re: update dl380 g7

Stefano-It — Wed, 17 Feb 2016 20:31:52 GMT

Hi Torsten,

thanks for your "how to", now the update is done but before these I had delete from usb key the newer similiar update (2 files) that were in conflict with this you gave to me (HPD7).

I can't send to you a caffe, but I can say to you many "grazie".

Have u a nice day.

Regards

Stefano