https://community.hpe.com/t5/proliant-servers-ml-dl-sl/kernel-power/m-p/6859279#M153554 <P>The server has rebooted four times twice a year, it's Proliant ML310eGen8v2, i have no smart array. &nbsp;The server manger software (windows server 2008R2) says:</P><P>The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.</P><P>Do I have to install a patch o a new driver ?.</P> Fri, 13 May 2016 17:21:58 GMT aorr1antia 2016-05-13T17:21:58Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/kernel-power/m-p/6859279#M153554 <P>The server has rebooted four times twice a year, it's Proliant ML310eGen8v2, i have no smart array. &nbsp;The server manger software (windows server 2008R2) says:</P><P>The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.</P><P>Do I have to install a patch o a new driver ?.</P> Fri, 13 May 2016 17:21:58 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/kernel-power/m-p/6859279#M153554 aorr1antia 2016-05-13T17:21:58Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/kernel-power/m-p/6859644#M153558 <UL><LI>If the system is not connected to a backup power supply, then it should be, preferably with power conditioning (for brown outs and over-voltage situations).</LI><LI>Connect to Windows Update and make sure all updates have been applied.</LI><LI>Check for newer drivers and firmware for your hardware (latest SPP - Service Pack for Proliant).</LI><LI>Check the system logs for error conditions..</LI></UL> Mon, 16 May 2016 13:42:33 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/kernel-power/m-p/6859644#M153558 Edwin Eppel 2016-05-16T13:42:33Z