https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dl380-gen9-uefi-boot-order-gets-reset-after-bios-ilo-upgrade/m-p/6861220#M153608 <P>After an upgrade, one wouild imagine that the upgrade will use its own default settings. Consequently, you need to go into the BIOS and reset it to the order you want.</P><P>&nbsp;</P> Fri, 20 May 2016 09:09:14 GMT xdeetee 2016-05-20T09:09:14Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dl380-gen9-uefi-boot-order-gets-reset-after-bios-ilo-upgrade/m-p/6861136#M153606 <P>Anyone else have the UEFI boot order get reset after upgrading the BIOS from 1.50 to 2.00 and ILO from 2.30 to 2.40 using the April 2016 HPSPP?&nbsp; It has happened to me several times now on separate DL380 Gen9 boxes at different client sites.&nbsp; It isn't an issue with Windows servers, but ESXi fails to boot because it doesn't use Windows Boot Manager, which gets put at the top of the list, then USB, then the NICs, and finally the Embedded RAID controller where the boot LUN is.&nbsp; So of course, the ESXi hosts attempt to PXE boot.&nbsp; Pretty annoying.</P><P>&nbsp;</P><P>dcc</P> Fri, 20 May 2016 00:46:57 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dl380-gen9-uefi-boot-order-gets-reset-after-bios-ilo-upgrade/m-p/6861136#M153606 dcolpitts 2016-05-20T00:46:57Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dl380-gen9-uefi-boot-order-gets-reset-after-bios-ilo-upgrade/m-p/6861220#M153608 <P>After an upgrade, one wouild imagine that the upgrade will use its own default settings. Consequently, you need to go into the BIOS and reset it to the order you want.</P><P>&nbsp;</P> Fri, 20 May 2016 09:09:14 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dl380-gen9-uefi-boot-order-gets-reset-after-bios-ilo-upgrade/m-p/6861220#M153608 xdeetee 2016-05-20T09:09:14Z