topic Re: iLO web interface missing information in ProLiant Servers (ML,DL,SL)

iLO web interface missing information

JDSafari — Wed, 28 Sep 2016 13:08:26 GMT

Hello, i'll try to explain the issue as best i can. I had configured iLO on 2 DL360p Gen8 servers about a month or two ago. They are running ESXi 6.0u2. Today, one of the server fans was screaming, so I went to log in to see what was going on. One of the servers, I couldn't log in using the username and password I configured. I used the HPONCFG tool to create the user account again. I was able to log in, and found that the Fans, Temperature Sensors, and Power Supplies are "not installed." On the information overview page, the Product name is "Null" and serveral other fields show as "Unknown." Of course the iLO web interface for the other server is working just fine.

Anyone have any insight? I already reset the iLO, but I cannot restart the server until Sunday.

Re: iLO web interface missing information

parnassus — Thu, 29 Sep 2016 09:13:15 GMT

Routine question: was the iLO4 updated to version 2.44 yet? ...not considering all other Server's Firmwares potentially upgradable (like SystemROM, Smart Array controller, NIC, etc.).

Re: iLO web interface missing information

JDSafari — Thu, 29 Sep 2016 11:52:02 GMT

Well silly me, that's the first thing i should have looked at. The firmware revisions are the same for both servers. However, they are on 2.30. Next time I get a maintenance window, I'll update the ESXi drivers (ugh) and firmwares all around. If I still have a problem I'll post again.

Re: iLO web interface missing information

parnassus — Thu, 29 Sep 2016 14:50:42 GMT

Glad it worked!

P.S.

Since I read you're planning a ESXi maintenance window...will be interesting to exchange some opinions on what is best procedure to keep a ProLiant with ESXi updated (see my post here). I'm still figuring out what is the best/secure method to keep a ProLiant server running VMware ESXi updated at all levels.

Re: iLO web interface missing information

DanRobinson — Fri, 30 Sep 2016 21:01:14 GMT

You can reboot the iLO (not the entire machine) by logging into the iLO and going to the Diagnostics section on the left side menu.

See if that helps.

Re: iLO web interface missing information

Maclaine — Tue, 29 Aug 2017 06:07:20 GMT

Hi JDSafari, I'm also currently experiencing this issue. Did you fix the issue by just updating the iLO Firmware? The iLO Firmware version of the server i'm handling is 2.30.

Re: iLO web interface missing information

Maclaine — Fri, 22 Sep 2017 05:46:34 GMT

Hi guys, were you able to fix the issue after the iLO? firmware update? or is reboot also needed.

Re: iLO web interface missing information

Torsten. — Fri, 22 Sep 2017 06:13:00 GMT

A server reboot may help, a complete power cycle (pull the plugs) does certainly help.