SNMP info for physical drives on a DL360 G6 running Windows 2012 r2

jboettger — Tue, 21 Mar 2017 17:56:10 GMT

I am running Windows 2012 r2 on a DL 360 G6. I am trying to get physical disk info from the plugged in hard drives but I am unable to attached. I am using PRTG. When I try to install a probe for SNMP HP Physical Disk it says no disks exist. When I walk the host with an snmp tester no physical disk info is logged in the output. I have the management agents installed and the WBEM agents installed as I can see the stuff in the HP Management page but I cannot get PRTG to see the physical drive info. it does see the fan info, cpu info, overall status info. I have a similary configured DL360 G6 running Win 2008 r2 and have no problems seeing physical disk info. i also try setting up ILO port and can see general info but no physical disk info.

Any insight would be greatly appreciated.

Thanks

Jim

Re: SNMP info for physical drives on a DL360 G6 running Windows 2012 r2

Torsten. — Tue, 21 Mar 2017 18:11:33 GMT

Identical disk controllers in use? With identical firmware versions?

Re: SNMP info for physical drives on a DL360 G6 running Windows 2012 r2

jboettger — Tue, 21 Mar 2017 19:05:05 GMT

An outdated 410i array controller driver was the culprit.

All set now.

Thanks

Jim

topic Re: SNMP info for physical drives on a DL360 G6 running Windows 2012 r2 in ProLiant Servers (ML,DL,SL)

SNMP info for physical drives on a DL360 G6 running Windows 2012 r2

Re: SNMP info for physical drives on a DL360 G6 running Windows 2012 r2

Re: SNMP info for physical drives on a DL360 G6 running Windows 2012 r2