topic Status from iLO Rest Doesn't Match That from hpssacli in ProLiant Servers (ML,DL,SL)

Status from iLO Rest Doesn't Match That from hpssacli

mnicolazzo — Wed, 29 Mar 2017 02:43:32 GMT

I retrieved information for a logical drive on an HP Smart Storage Array on a ProLiant DL-380 Gen9 using the iLO Rest interface and the status returned is "warning". But if I get status for the same logical drive using hpssacli, it returns "OK". Does anyone have an idea why that might be? Also, I retrieved Ethernet card information using the Rest interface and all the interfaces returned "disabled" but two of them were definitely enabled and functioning. Why would iLO return that?

Thanks

Re: Status from iLO Rest Doesn't Match That from hpssacli

Oscar A. Perez — Wed, 29 Mar 2017 15:05:48 GMT

Is the HPE AMS service running on the OS?

Re: Status from iLO Rest Doesn't Match That from hpssacli

mnicolazzo — Wed, 29 Mar 2017 15:54:30 GMT

Ahh, that may be the problem. Thanks. I'll install it and see what I get.

Re: Status from iLO Rest Doesn't Match That from hpssacli

mnicolazzo — Wed, 29 Mar 2017 16:04:21 GMT

Yup, that did the trick. Thanks again!