topic Adding a new SAS HDD to Proliant DL380 Gen9 in ProLiant Servers (ML,DL,SL)

Adding a new SAS HDD to Proliant DL380 Gen9

ogionculer — Fri, 26 May 2017 06:12:07 GMT

Dear All,

This is very first message of mine in this portal. I hope to find a solution with your support.

I am using HP Proliant DL380 Gen9 in my organization. It is inculded with 500GB drive for OS, and 5 Hard Drives (RAID based) in Hard Drive Bay. All hard drives code is: 653957

I wanted to add another drive to my existing bay. But I will not connect to this drive to my existing RAID structure. So I bought a SAS 781577 and connected with my server. Hard Drive's light is blinking at the beginning and then it turns off. I also can not see my drive in "diskmgmt.msc"

Here is a short video of my problem; https://www.youtube.com/watch?v=g_jHkMGCyXA

I am afraid of the drive is not correct for my server. Or is there any restrict to connect a new hard drive to existig bay?

Re: Adding a new SAS HDD to Proliant DL380 Gen9

kkpro — Tue, 30 May 2017 13:01:27 GMT

Hello. I suspect you will not see disk in Windows mgmt utility (if you mean that) until you create a new volume using HP Array Configuration Utility.

Re: Adding a new SAS HDD to Proliant DL380 Gen9

Torsten. — Tue, 30 May 2017 13:10:32 GMT

>> I also can not see my drive in "diskmgmt.msc"

Well, windows cannot see the physical drives at all, but logical drives (your RAIDs) only.

So you need to use SSA (smart storage administrator) to either create a new RAID (0) on your single new drive or use this drive to extend the existing RAID5.

Re: Adding a new SAS HDD to Proliant DL380 Gen9

ogionculer — Tue, 06 Jun 2017 12:27:54 GMT

Yes you are correct!

I also found the solution. I pressed to F10 (ıntelligence provisioning) and then format the disk with SSA.

Re: Adding a new SAS HDD to Proliant DL380 Gen9

charleslcso — Mon, 30 Oct 2023 13:01:27 GMT

Hello,

Can I use SSA after the server is booted up? I'm new to HPE, and I would like to add/remove drives without rebooting the server.

Any guides?

Re: Adding a new SAS HDD to Proliant DL380 Gen9

Sunitha_Mod — Tue, 31 Oct 2023 05:28:00 GMT

Hello @charleslcso,

Thank you for posting! We would recommend you to create a new topic using the "New Discussion" button, so the experts can check and assist you further.