topic ILO ADMINISTRATOR PASSWORD RESET FROM CMD in ProLiant Servers (ML,DL,SL)

ILO ADMINISTRATOR PASSWORD RESET FROM CMD

vikasgaur — Tue, 11 Jul 2017 20:33:03 GMT

How can i reset the ILO password for ProLiant DL380 G7 linux without downtime from commandline.Can you share the steps to reset the ILO administrator password and also steps to configure the ILO as well.

Re: ILO ADMINISTRATOR PASSWORD RESET FROM CMD

PiterParker — Wed, 12 Jul 2017 08:34:11 GMT

Hi m8,

Could you check if you have hponcfg application installed on your system?

Please find guide below:

https://www.vcloudnine.de/reset-the-hp-ilo-administrator-password-with-hponcfg-on-esxi/

Regards,

Piotr

Re: ILO ADMINISTRATOR PASSWORD RESET FROM CMD

vikasgaur — Sun, 16 Jul 2017 14:40:15 GMT

Thanks it worked for me.
Just want on help if hponcfg was not installed how can i install it and configure my new ilo.
Thanks for your the responce.

Re: ILO ADMINISTRATOR PASSWORD RESET FROM CMD

PiterParker — Mon, 17 Jul 2017 08:27:47 GMT

Hi,

If you will not have it below is the link to download it.

http://h20564.www2.hpe.com/hpsc/swd/public/detail?swItemId=MTX_5ab6295f49964f16a699064f29

Thanks,

Piotr

Re: ILO ADMINISTRATOR PASSWORD RESET FROM CMD

Zakour — Wed, 07 Nov 2018 12:35:58 GMT

Thank you for sharing.

I noticed that procedure is for ESXi , How about if we have RHEL 7.3 on Bare Metal (HP Proliant DL380p Gen8) ?

Here below the iLo config file, I want to put a password = "Passwd123!"

Can you pleaase assist with the new xml file ?

<RIBCL VERSION="2.1">
<LOGIN USER_LOGIN="Administrator" PASSWORD="password">
<DIR_INFO MODE="write">
<MOD_DIR_CONFIG>
<DIR_AUTHENTICATION_ENABLED VALUE = "N"/>
<DIR_LOCAL_USER_ACCT VALUE = "Y"/>
<DIR_SERVER_ADDRESS VALUE = ""/>
<DIR_SERVER_PORT VALUE = "636"/>
<DIR_OBJECT_DN VALUE = ""/>
<DIR_OBJECT_PASSWORD VALUE = ""/>
<DIR_USER_CONTEXT_1 VALUE = ""/>
<DIR_USER_CONTEXT_2 VALUE = ""/>
<DIR_USER_CONTEXT_3 VALUE = ""/>
</MOD_DIR_CONFIG>
</DIR_INFO>
<RIB_INFO MODE="write">
<MOD_NETWORK_SETTINGS>
<SPEED_AUTOSELECT VALUE = "Y"/>
<NIC_SPEED VALUE = "10"/>
<FULL_DUPLEX VALUE = "N"/>
<IP_ADDRESS VALUE = "xxx.xxx.xxx.xxx"/>
<SUBNET_MASK VALUE = "255.255.255.0"/>
<GATEWAY_IP_ADDRESS VALUE = "xxx.xxx.xxx.xxx"/>
<DNS_NAME VALUE = "ILOCZJ809082Y"/>
<PRIM_DNS_SERVER value = "xxx.xxx.xxx.xxx"/>
<DHCP_ENABLE VALUE = "N"/>
<DOMAIN_NAME VALUE = ""/>
<DHCP_GATEWAY VALUE = "N"/>
<DHCP_DNS_SERVER VALUE = "N"/>
<DHCP_STATIC_ROUTE VALUE = "N"/>
<DHCP_WINS_SERVER VALUE = "N"/>
<REG_WINS_SERVER VALUE = "Y"/>
<PRIM_WINS_SERVER value = "0.0.0.0"/>
<STATIC_ROUTE_1 DEST = "0.0.0.0" GATEWAY = "0.0.0.0"/>
<STATIC_ROUTE_2 DEST = "0.0.0.0" GATEWAY = "0.0.0.0"/>
<STATIC_ROUTE_3 DEST = "0.0.0.0" GATEWAY = "0.0.0.0"/>
</MOD_NETWORK_SETTINGS>
</RIB_INFO>
<USER_INFO MODE="write">
</USER_INFO>
</LOGIN>
</RIBCL>

Re: ILO ADMINISTRATOR PASSWORD RESET FROM CMD

Jimmy Vance — Wed, 07 Nov 2018 15:14:21 GMT

@Zakour wrote:
Thank you for sharing.
I noticed that procedure is for ESXi , How about if we have RHEL 7.3 on Bare Metal (HP Proliant DL380p Gen8) ?
Here below the iLo config file, I want to put a password = "Passwd123!"
Can you pleaase assist with the new xml file ?

Download the current HPE Lights-Out XML PERL Scripting Sample for Linux and use the 'change_password.xml' file https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_76bfa460792d4f7cbc0aac234e This file contains a large XML library of iLO settings

If you use the included perl script to remotely (over the network) to change the password you will need to provide a valid username / password in the LOGIN USER_LOGIN field to access iLO.

To use locally from the host OS you need to download 'hponcfg' which is a tool from the scripting toolkit. The standalone version of the 'hponcfg' can be found here https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_4fe891d8669c4c4fbfba2a06f4