topic Re: Cant connect to ILO4 after Update in ProLiant Servers (ML,DL,SL)

Cant connect to ILO4 after Update

GT-R — Thu, 21 Sep 2017 22:56:21 GMT

Hi,

I Updated my ILO4 from a DL360p Gen8 from 2.5 to 2.55

Now i cant access the ILO4, im getting this alert:

"Connection with iLO cannot be established. If you recently made changes to the network configurations, you may need to refresh this page to re-negotiate an SSL connection."

Anyone can help me?

Re: Cant connect to ILO4 after Update

RCP1 — Fri, 22 Sep 2017 07:17:56 GMT

SSL error issue after firmware update, wait for some time and clear the IE cache. Re-open agian.

IF still same issue open the iLO in putty and reset the iLO with belwo CMD.

Reset /map1

Re: Cant connect to ILO4 after Update

PDP-Fan — Wed, 04 Oct 2017 08:15:53 GMT

https://community.hpe.com/t5/ProLiant-Servers-ML-DL-SL/iLO-2-5-upgrade-to-2-55-issues/td-p/6978227

Could this be the problem?
It seems that iLO configuration gets lost after update to 2.54 or 2.55. Check your iLO config...

Re: Cant connect to ILO4 after Update

waaronb — Tue, 10 Oct 2017 16:41:35 GMT

That's my guess too, that the ILO config was reset. I had that happen on 2 out of 8 DL380 Gen8 servers when updating ILO4 to 2.54/2.55. Kind of a pain, but I just used the ILO online config in Windows to reset the network/user and then used the web interface to do the rest (add the advanced key back, setup other network/security options).

HP really blew it on that update, whatever the cause was.