https://community.hpe.com/t5/proliant-servers-ml-dl-sl/ilo-is-not-working/m-p/6978214#M159382 <P>Action Plan</P><P>*First of all, you need to check your end network&nbsp;configuration settings, So you can try direct&nbsp;connect to the ILO port using a network&nbsp;cable and if can't log please check&nbsp; Your pc&nbsp;Ip address and subnet, Network cable faulty or not.still remaining&nbsp;</P><P>*Update the latest firmware.&nbsp;<SPAN>still remaining&nbsp;</SPAN></P><P>*Reset the ILO using Intelligent&nbsp;Provisioning.&nbsp;</P><P>*Still problem remaining please&nbsp;raise an HPE support case.&nbsp;</P> Wed, 27 Sep 2017 05:29:59 GMT Buddika2017 2017-09-27T05:29:59Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/ilo-is-not-working/m-p/6977784#M159347 <P>When I am trying to do some network settings some where ILO port got disabled now i cannot access the web access and server port LED also not blinking. If I restart the server ILO ip address is showing the same but i cannot ping the IP address.</P><P>Could anyone can help me out.</P> Sun, 24 Sep 2017 05:29:11 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/ilo-is-not-working/m-p/6977784#M159347 Sinju 2017-09-24T05:29:11Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/ilo-is-not-working/m-p/6978214#M159382 <P>Action Plan</P><P>*First of all, you need to check your end network&nbsp;configuration settings, So you can try direct&nbsp;connect to the ILO port using a network&nbsp;cable and if can't log please check&nbsp; Your pc&nbsp;Ip address and subnet, Network cable faulty or not.still remaining&nbsp;</P><P>*Update the latest firmware.&nbsp;<SPAN>still remaining&nbsp;</SPAN></P><P>*Reset the ILO using Intelligent&nbsp;Provisioning.&nbsp;</P><P>*Still problem remaining please&nbsp;raise an HPE support case.&nbsp;</P> Wed, 27 Sep 2017 05:29:59 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/ilo-is-not-working/m-p/6978214#M159382 Buddika2017 2017-09-27T05:29:59Z