topic Re: DL320e Gen8 Won't Load OS in ProLiant Servers (ML,DL,SL)

DL320e Gen8 Won't Load OS

Jduehmig — Tue, 05 Feb 2013 15:46:28 GMT

I have a new DL320e Gen8 that I am attempting to load with Windows 2012 using Intelligent Provisioning. I have done this on other servers with Windows 2008 R2 with no problems. On this server I get the error: "Error with the copy daemon" when it starts to copy the OS files. I have tried with both a USB thumb drive and a USB DVD drive. (This server does not have an onboard optical drive.) I have updated the firmware with no change. Has anyone seen this before? Any ideas on how I should proceed?

Thanks,

Joe

Re: DL320e Gen8 Won't Load OS

PGTRI — Wed, 06 Feb 2013 06:55:04 GMT

hi,

PLease update the IP to version 1.30 and try again.

http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5269386&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253DMTX_3b7a9f12587448618a5040e912%257CswEnvOID%253D4138%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

Thanks

regards,

Re: DL320e Gen8 Won't Load OS

Jduehmig — Wed, 06 Feb 2013 14:55:49 GMT

Thanks for the suggestion. I have updated the IP both via on-line and USB stick. No change. I still get the error "Error with the copy daemon". I have also downloaded a new copy of the Windows 2012 .iso file and created a new bootable thumb drive with no change. Anything else I should try?

Thanks,

Joe

Re: DL320e Gen8 Won't Load OS

PGTRI — Wed, 06 Feb 2013 15:16:11 GMT

hi,

You can try following:

Remove the cable from the NIC and go in ACU via IP and delete the array and recreate it after that. Go in to the install menu and select skip update and continiue with the installation.

Thanks

regards,

Re: DL320e Gen8 Won't Load OS

Jduehmig — Thu, 07 Feb 2013 14:52:36 GMT

No good. Tried all suggestions and still get the error. I've opened a ticket with HP since the server is under warranty. Thanks for your help.

Re: DL320e Gen8 Won't Load OS

grihm123 — Tue, 12 Dec 2017 17:30:35 GMT

I purchased 2 DL320e Gen8 servers and also I'm having issues with installing operating systems. Can you share what they resolutions that was provided to you via HPE?

Re: DL320e Gen8 Won't Load OS

Joe Duehmig — Wed, 13 Dec 2017 15:00:32 GMT

The final issue that I had was that I was doing this remotely. I would insert the USB drive, start the install process, and then walk away and do other things. What was happening was the server was rebooting as part of the install, finding the USB drive still inserted, and attempting to boot to that device. I found I had to remain with the server and remove the USB drive at the reboot point so it would boot to the new image in the HDD.

Joe