topic Re: Server health LED flashing Red in ProLiant Servers (ML,DL,SL)

Server health LED flashing Red

Dark_Force — Tue, 13 Mar 2018 11:53:08 GMT

My department's HP Tower server has a RED LED flashing light blinking. However it is booting into Windows, but the server fans are running at full speed throughout producing high noise. The LED green light in the PSU is not Glowing. Please help me resolve this problem

Re: Server health LED flashing Red

FabioC1 — Tue, 13 Mar 2018 12:58:14 GMT

Hi Dark_Force

Please provide more information about your server.

MLxxxx

Generation xx

Regards

Re: Server health LED flashing Red

Dark_Force — Tue, 13 Mar 2018 13:45:00 GMT

Hi,

It is a Hp Proliant ML server gen 7 or 8.

I don't know more about the model number, Sorry

Thank You

Re: Server health LED flashing Red

FabioC1 — Thu, 01 Oct 2020 09:41:19 GMT

Dark_Force , So can you acces the ILO and see more information about error ?

Led Indicator -

ML110 g7 - https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c02790685

ML310e ge8 - https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c05067698

Re: Server health LED flashing Red

Dark_Force — Wed, 14 Mar 2018 08:45:05 GMT

It says ILO 4 is not responding. system health monitoring has been disabled

Re: Server health LED flashing Red

Torsten. — Wed, 14 Mar 2018 09:44:44 GMT

i would try now pulling the power plugs for an ILO cold boot.

Re: Server health LED flashing Red

Dark_Force — Wed, 14 Mar 2018 11:21:10 GMT

I tried, No change, @Torsten.

Re: Server health LED flashing Red

FabioC1 — Wed, 14 Mar 2018 12:49:30 GMT

Dark_Forc

Try to update the firmware and driver of the equipment, because is very old."2013"

Try update the ILO 4

first update driver - https://support.hpe.com/hpsc/swd/public/detail?sp4ts.oid=1009143853&swItemId=MTX_e196fcb67e1941de959751786f&swEnvOid=4184#tab-history

After - Firmware - https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_ed3b2dda5a4542f69ab76e7e17

Re: Server health LED flashing Red

Dark_Force — Mon, 19 Mar 2018 11:51:20 GMT

I downloaded the firmware from HPE and installed it. and rebooted it. now the red LED light doesn't blink initially. but after pressing the power button green light emits in the health monitoring and then red blinking light. then the server powers down and off. Nothing comes in the screen.

I found the server model. It is an HP Proliant ML350e Gen 8 sever