Smart Array B110i SATA RAID Error

IT-FFL — Wed, 28 Mar 2018 13:17:39 GMT

Hello,

I need help troubleshooting error code 352? in the HP ACU. I cannot setup a RAID array with the installed disks on a DL320 G6 Server. However, the ORCA utlity does allow me to setup a RIAD array but only 160GB of each 1TB disk is detected. Any help in this matter would be appreciated!

Thank you.

Re: Smart Array B110i SATA RAID Error

FabioC1 — Wed, 28 Mar 2018 14:39:57 GMT

Hi - IT-FFL

The HP Smart Array Hot Plug Advanced Pack for B110i provides the raid support for the embedded SATA controller. The Hot Plug Advance kit is a License to enable the RAID support on Hot Plug models. It supports up to six 3G SATA hard disk drives. It will support a maximum of two (2) logical drives. It supports Raid 0, 1 and 1+0. To get started, the HP Smart Array Hot Plug Advanced Pack for B110i is part of the Smart Start. This is designed as a Smart Array and will use ACU CLI and option ROM for creating logical drives.

Please, try update the firmware using SPP .

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00006238it_it

topic Re: Smart Array B110i SATA RAID Error in ProLiant Servers (ML,DL,SL)

Smart Array B110i SATA RAID Error

Re: Smart Array B110i SATA RAID Error