https://community.hpe.com/t5/proliant-servers-ml-dl-sl/proliant-ml150-g6-partition-failure/m-p/7001809#M162023 <P>Got a recycled server from my university. It's functional, but they removed the hard drives before resale. I replaced one of the hard drives with a 1 TB SATA hot swap. I attempted to use the hp proliant ml150 g6 easy setup cd, but when I was in the final step I received an error:</P><P>"partitioning has failed unable to continue could not update disk mbr code"</P><P>I have not done anything else to the server apart from booting with the cd. Currently though, the server indicates that the hard drive that I replaced is in slot 8. However, this would normally be perceived as slot 1 in the hot swap rack.</P><P>Any information would be helpful, specifically why my system is failing in partition.</P> Sun, 08 Apr 2018 00:43:57 GMT acscott 2018-04-08T00:43:57Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/proliant-ml150-g6-partition-failure/m-p/7001809#M162023 <P>Got a recycled server from my university. It's functional, but they removed the hard drives before resale. I replaced one of the hard drives with a 1 TB SATA hot swap. I attempted to use the hp proliant ml150 g6 easy setup cd, but when I was in the final step I received an error:</P><P>"partitioning has failed unable to continue could not update disk mbr code"</P><P>I have not done anything else to the server apart from booting with the cd. Currently though, the server indicates that the hard drive that I replaced is in slot 8. However, this would normally be perceived as slot 1 in the hot swap rack.</P><P>Any information would be helpful, specifically why my system is failing in partition.</P> Sun, 08 Apr 2018 00:43:57 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/proliant-ml150-g6-partition-failure/m-p/7001809#M162023 acscott 2018-04-08T00:43:57Z