topic Re: RIB or ILO has not mouse available in ProLiant Servers (ML,DL,SL)

RIB or ILO has not mouse available

Jim Mulgrew — Mon, 17 Mar 2003 19:43:54 GMT

We've just built out a new environment consisting of DL580G2 and 6400 servers. They've all had the latest rompaq installed on them and are up to the SmartStart v5.5 level. Some are using the ILO and some have RIBs installed. We've seen an unusual, yet consistent problem across the board. On any of the servers, when accessing them through the RIB/ILO we have no mouse, but we do have input with the keyboard. Some of the RIBs have the internal ribbon cable hooked up for the mouse/kybd and others have the external Y-cable. Here's the $64 question. Our boss got new KVM dongles to go with this new location. That is the one difference between this site and all the others. These dongles are from HP (pn#262588-B21). Does anyone else have this setup or can HP/Compaq tell me if there is a compatibility problem with these dongles? Thanks.

- Jim

Re: RIB or ILO has not mouse available

Martin Forster_1 — Tue, 18 Mar 2003 10:11:46 GMT

We have also problems with G2 and G3 Server and our KVM.

Paragon Raritan.
They say that the behaviour of the PS2 Port ist not standard conform.
HP and Paragon are disicussing that to find the guilty company.

Greetings.

Re: RIB or ILO has not mouse available

Stein Waalen — Tue, 18 Mar 2003 12:14:13 GMT

Same problem with DL 360 standard (G1). When connected through rILO, the mouse stops functioning through a KVM switch. Anyone ?

Best Regards
Stein Waalen
Norway

Re: RIB or ILO has not mouse available

Jason Dy_1 — Tue, 18 Mar 2003 18:35:23 GMT

We are also having problems with our mouse with our DL380 G3s connected to a Belkin OmniView Pro 2 8-Port KVM with Belkin cables. The mouse works shortly after reboots, but stops working after a short time time.

Re: RIB or ILO has not mouse available

Tom Mucha_1 — Tue, 18 Mar 2003 20:18:48 GMT

You guys have proxies set up in your browser? If so, exclude the address of the RIB. Also which generation RIB's are they? Also, if you don't use the KVM, does everything work fine?

Re: RIB or ILO has not mouse available

Jason Dy_1 — Tue, 18 Mar 2003 20:37:01 GMT

I am not using proxy on any of the browsers and I have tried accessing iLO from multiple machines with each machine having the same problem.

I am using Integrated Lights Out Advanced Firmware 1.20.

Re: RIB or ILO has not mouse available

Tom Mucha_1 — Tue, 18 Mar 2003 20:40:11 GMT

Ok Jason, and you are using the internal cable?

How about the external mouse/keyboard cable? That should not be used on the server you mentioned.

Re: RIB or ILO has not mouse available

Jason Dy_1 — Tue, 18 Mar 2003 22:22:55 GMT

Thank you for your response. As far as I know the Integrated Lights-Out does not use external/internal cables (is that Remote Insight Lights-Out Edition?). The only cable is the network cable connection from the LAN to the iLO card. Please correct me if I'm mistaken.

Re: RIB or ILO has not mouse available

Tom Mucha_1 — Wed, 19 Mar 2003 13:16:54 GMT

I'm sorry, too many boards flying around in my head!!

Re: RIB or ILO has not mouse available

Jim Mulgrew — Wed, 19 Mar 2003 14:56:14 GMT

We see the problem with the new HP KVM IP Console and their associated dongles. When I replace them with the older Compaq KVM console and long gray KVM cables, the problem goes away. Compaq has suggested that I update the firmware of the console and the dongles. I will let you all know how it goes.

- Jim

Re: RIB or ILO has not mouse available

Jason Dy_1 — Wed, 19 Mar 2003 16:29:41 GMT

I had one server that was working, the Firmware of the iLO was 1.15, last night I upgraded the Firmware and now the mouse has stopped working like my other servers. Does anyone know if rolling back the Firmware version is possible?

Thanks.

Re: RIB or ILO has not mouse available

Jason Dy_1 — Wed, 19 Mar 2003 16:46:32 GMT

Ignore my last reply, I checked another one of my servers and it was still on 1.15 and the mouse wasn't working, so that probably isn't it.

Re: RIB or ILO has not mouse available

Jim Mulgrew — Wed, 19 Mar 2003 21:37:32 GMT

Hello -

After a few calls to Compaq/HP support I got a fix. For my situation, in which we were seeing the same problem across all servers that had RIB or ILO access, we had to download a later version of the HP Viewer software for the KVM IP Console. We had to upgrade the firmware of the console and then upgrade the interface adapters (dongles). Both can be done with the software downloaded of their site. If this problem applies to you, go to: http://h18023.www1.hp.com/support/files/server/us/download/17419.html
and download the software. Good luck.

- Jim