topic Re: Raid Controller Issue - P212 in ProLiant Servers (ML,DL,SL)

Raid Controller Issue - P212

NItheshull — Thu, 24 May 2018 05:20:16 GMT

HI,

Having HP ML 110 G6 server, issue with a raid controller card P212 with 4 HDD's all it was working fine and suddenly stopped initilizing in the startup and stopped booting and the card chip is getting too much heat please suggest me what would be the cause. Earlier during the boot all the Leds were blinking green colour now only one orange light glows.

whether the hard disk connected to the raid controller can it be connected to onboard sata connectors will it work?

My view is that raid controller card is faulty, checked connecting to other working system and there in the device manager card is shown

Re: Raid Controller Issue - P212

Suman_1978 — Tue, 29 May 2018 09:12:25 GMT

Hi,

Refer to QuickSpecs of HP Smart Array P212 Controller, HP ProLiant ML110 Generation 6, and see if the existing 4 hard drives are compatible with onboard controller which is B110i SATA RAID Controller.

I would suggest to check if all the fans are working in the server and airflow is proper, if the card is working on a different server, then do check some other card in this server, just to make sure if the slot is working fine.

Thank You!
I am a HPE employee
_________________________________________
Was the post useful? Click on the white KUDOS! Thumb below. Kudos is a way of saying thank you to a post.
// Useful Links for ProLiant Servers / Community FAQ / Rules of Participation / Servers Blog //

Re: Raid Controller Issue - P212

mlasidab — Wed, 30 May 2018 14:22:38 GMT

Just guessing but have to tried removing the cache memory and see what happens?

Thanks