topic Requirements for using NVMe SSD disks on DL360 G9 Server in ProLiant Servers (ML,DL,SL)

Requirements for using NVMe SSD disks on DL360 G9 Server

MGRF — Mon, 30 Jul 2018 16:59:33 GMT

Hi,

I need to install 2 normal SAS disk and also two NVMe SSD disks (960GB each or more) on my DL360 G9 server with exact specs as follows:

HPE ProLiant DL360 Gen9 E5-2630v4 1P 16GB-R P440ar 8SFF 500W PS Base SAS Server (818208-B21)

And I have some questions:

1- Do we need to purchase and install a separate cage for NVMe disks or the can be fit into the existing one. I can see this config and I don't know whether it needs another cage or not:

4 SAS/SATA (Drive 1-4) + 6 NVMe (Drive 5-10)

The current front panel is like the following photo. (the default shipped)

2- I think I need an enablement kit. Appearently NVMe 2.5" SSDs require a PCIe Express Bay Enablement Kit,

Is this one OK?

HP DL360 Gen9 NVMe 2 Solid State Drive Express Bay Enablement Kit 764628-B21
NOTE: This option provides support for up to 2 NVMe SFF drives.
This option cannot be used with the Universal Media Bay Kit.
NOTE: The HPE DL360 Gen9 High Performance Fan Kit (766201-B21) will be required
with this option.

3- Does this enablement kit include all kits, cables, PCI card and cage necessary for these hards?

4- Where this kit fits? Is the DVD-ROM replaced by the cage needed for these 2 NVMe disks?

5- I read that these disks are not supported by hardware RAID controller on the server (P440). Am I right? These disks can only be RAIDed in the operating system?

6- What is this Fan kit ?766201-B21 ? (which as read above is required for using these NVMe disks) Is this a single fan or the whole 6 fans in the back of front panel of server? Or it's just a single fan which should be installed instead of one of the fans or I donno maybe beside them?

Sorry for long post and too many questions and thanks in advance.

Re: Requirements for using NVMe SSD disks on DL360 G9 Server

Pentan — Wed, 28 Aug 2019 13:44:52 GMT

Hi!

Did you get an answer to your questions? I'm interested in the same questions now

Re: Requirements for using NVMe SSD disks on DL360 G9 Server

avenonet — Fri, 10 Apr 2020 16:01:52 GMT

and here I am asking the same questions and nothing from HPE

Re: Requirements for using NVMe SSD disks on DL360 G9 Server

opoplawski — Fri, 23 Oct 2020 17:05:54 GMT

I ordered one of these systems with the NVMe 2 Solid State Drive Express Bay Enablement Kit 764628-B21 installed. The kit replaces the dvd drive and serial port connector (everything above the two drive bays on the lower right). I presume the kit contained everything needed as everything was connected. In includes a card that plugs into one of the pci slots. The devices are NVMe drives and so connect directly to the PCIe bus bypassing any RAID. Any RAID will need to be done by the OS. You also need special NVMe drive carriers - these did not come with the kit.

Re: Requirements for using NVMe SSD disks on DL360 G9 Server

danielam3 — Thu, 07 Nov 2024 12:44:30 GMT

Hi,

The chassi has one universal media Kit bay (this means that the bay can be populated with many options and according to the option you will choose the kit:

HPE Unique Options

HPE DL360 Gen9 2SFF SAS/SATA Universal Media Bay Kit 764630-B21

NOTE: Required when upgrading from an 8SFF config to a 10SFF config.

This option kit is not supported on the 4LFF Chassis.

This option kit cannot be used with the DVD-ROM or DVD-RW Universal Media Bay option kits.

NOTE: This kit contains a cable to attach the 2 drives to the internal B140i SATA controller.

For SAS, an alternate storage controller and its associated cable kit are required.

HPE DL360 Gen9 SFF DVD-RW/USB Universal Media Bay Kit 764632-B21

NOTE: DVD-RW, USB 2.0 and VGA included.

This option kit cannot be used with the 2 SFF SAS/SATA option kit (764630-B21).

HPE DL360 Gen9 SFF DVD/USB Universal Media Bay Kit 818213-B21

NOTE: DVD ROM, USB 2.0 and VGA included.

This option kit cannot be used with the 2 SFF SAS/SATA option kit (764630-B21).

HPE DL360 Gen9 SFF USB/VGA Universal Media Bay Kit 764634-B21

NOTE: Adds front VGA and USB 2.0 ports to SFF chassis.

This option kit cannot be used with the 2 SFF SAS/SATA option kit (764630-B21).

HPE DL360 Gen9 High Performance Heat Sink Kit 795235-B21

NOTE: These are included in some higher Watt processors (see processor section), but may also be added to lower power processors to reduce fan power consumption.

HPE DL360 Gen9 Rear Serial Port and Enablement Kit 764646-B21

HPE DL360 Gen9 SFF Systems Insight Display Kit 764636-B21

NOTE: Adds a System Insight Display for improved diagnosis capabilities on an 8FF or 10SFF model.

*****HPE DL360 Gen9 NVMe 2 Solid State Drive Express Bay Enablement Kit 764628-B21 *****

NOTE: This option provides support for up to 2 NVMe SFF drives.

This option cannot be used with the Universal Media Bay Kit.

NOTE: The HPE DL360 Gen9 High Performance Fan Kit (766201-B21) will be required with this option.

NOTE: The PCIe card in this enablement kit can only be populated in slot1 of primary riser or in slot3 of secondary optional FH riser.

***HPE DL360 Gen9 6 NVMe + 4 SAS/SATA Express Bay Enablement Kit 817676-B21****

NOTE: This option kit provides support for up to 6 NVMe drives (drives 5-10).

NOTE: The PCIe card in this enablement kit can only be populated in slot1 of primary riser.

HPE DL360 Gen9 LFF USB/VGA Kit 764638-B21

NOTE: Adds front VGA and USB 2.0 ports to LFF chassis.

This option kit cannot be used with the 2 SFF SAS/SATA Option Kit (764630-B21).

HPE DL360 Gen9 LFF Systems Insight Display Kit 764640-B21

NOTE: Adds a System Insight Display for improved diagnosis capabilities on a 4LFF model.

HPE DL360 Gen9 Location Discovery Services Ear Kit 764757-B21

NOTE: Requires ProLiant Location Discovery Services Infrastructure within server racks.

HPE Legacy FIO Mode Setting 758959-B22

NOTE: UEFI is the default, this FIO part can be used for CTO to enable Legacy mode

*****************ANOTHER OPTION BAY ENABLEMENT KIT NOTE: This option provides support for up to 2 NVMe SFF drives *****************************

HPE DL360 Gen9 NVMe 2 Solid State Drive Express Bay Enablement Kit 764628-B21

NOTE: This option provides support for up to 2 NVMe SFF drives.

This option cannot be used with the Universal Media Bay Kit.

NOTE: The HPE DL360 Gen9 High Performance Fan Kit (766201-B21) will be required with this option.

NOTE: The PCIe card in this enablement kit can only be populated in slot1 of primary riser or in slot3 of secondary optional FH riser

Re: Requirements for using NVMe SSD disks on DL360 G9 Server

TVVJ — Fri, 08 Nov 2024 16:12:32 GMT

Hello,

You may need to install either "HPE DL360 Gen9 NVMe 2 Solid State Drive Express Bay Enablement Kit 764628-B21"
or "HPE DL360 Gen9 6 NVMe + 4 SAS/SATA Express Bay Enablement Kit 817676-B21" as per page 21 of the HPE ProLiant DL360 Gen9 Server's QuickSpecs.

You may also refer to the following link:
https://partsurfer.hpe.com/Search.aspx?searchText=817676-B21

Regards,