topic Re: Connection with iLO cannot be established in ProLiant Servers (ML,DL,SL)

Connection with iLO cannot be established

Yashin77 — Wed, 08 Aug 2018 07:59:49 GMT

Connection with iLO cannot be established. If you recently made changes to the network configurations, you may need to refresh this page to re-negotiate an SSL connection after latest SPP update.

Clear IE cache first if still same issue open the iLO in putty and reset the iLO with below CMD.

Putty -- > SSH ILO --> run --> Reset /map1

Re: Connection with iLO cannot be established

Suvamay — Mon, 27 Aug 2018 04:53:58 GMT

Hello,

We don't see enough information about the query. No information about the product and ILO firmware. However below is the information based on your query.

The SSH connection issue has been fixed in HPE Integrated Lights-Out 4 Firmware version 2.60 (or later).

This is targeted to be fixed in the following iLO firmware:

HPE Integrated Lights-Out 5 Firmware version 1.30 (or later).
HPE Integrated Lights-Out Moonshot Firmware version 2.60 (or later).

For iLO4 Select the latest release of the HPE Integrated Lights-Out Firmware version 2.60 (or later).
For iLO5 issue will be fixed in HPE Integrated Lights-Out Firmware version 1.30 (or later).
For iLO Moonshot issue will be fixed in HPE Integrated Lights-Out Moonshot Firmware version 2.60 (or later).

Thanks.

I work for HPE

Re: Connection with iLO cannot be established

arthurem — Wed, 10 Apr 2019 05:48:50 GMT

my iLo version is 2.44,, According to your experience,

this CMD

"Clear IE cache first if still same issue open the iLO in putty and reset the iLO with below CMD.
Putty -- > SSH ILO --> run --> Reset /map1 "

It can reslove this problenm or not ? expect your feedback .Deeply appreciated.

Re: Connection with iLO cannot be established

victor-c — Mon, 04 Jan 2021 13:36:50 GMT

Thanks,

for me it's work. After reset need to wait 2-5 minutes.