https://community.hpe.com/t5/proliant-servers-ml-dl-sl/hdd-failure-or-maybe-not/m-p/7023308#M164426 <P>Hey guys,</P><P>i was going through the inventory of a customer of us and this confused me a bit.</P><P>Server is a ProLiant ML330 G6 with a P410 controller.</P><P>The Log Viewer claims that there is a failed drive, but the Array config and the LED indicators look fine.</P><P><A href="https://1drv.ms/u/s!AipGro0t2cicn4sgJkDBKDHiV-0vGw" target="_blank">IM Log Viewer</A></P><P><A href="https://1drv.ms/u/s!AipGro0t2cicn4shsK2XBKU6n0Z9vA" target="_blank">Array Configuration Utility</A></P><P><A href="https://1drv.ms/u/s!AipGro0t2cicn4sij8FWGVcpFs2iZg" target="_blank">LEDs up front</A></P><P>I would say safety first and replace the drives, what do you recommend?</P><P>Thank you</P> Fri, 26 Oct 2018 08:59:23 GMT Eifelaner 2018-10-26T08:59:23Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/hdd-failure-or-maybe-not/m-p/7023308#M164426 <P>Hey guys,</P><P>i was going through the inventory of a customer of us and this confused me a bit.</P><P>Server is a ProLiant ML330 G6 with a P410 controller.</P><P>The Log Viewer claims that there is a failed drive, but the Array config and the LED indicators look fine.</P><P><A href="https://1drv.ms/u/s!AipGro0t2cicn4sgJkDBKDHiV-0vGw" target="_blank">IM Log Viewer</A></P><P><A href="https://1drv.ms/u/s!AipGro0t2cicn4shsK2XBKU6n0Z9vA" target="_blank">Array Configuration Utility</A></P><P><A href="https://1drv.ms/u/s!AipGro0t2cicn4sij8FWGVcpFs2iZg" target="_blank">LEDs up front</A></P><P>I would say safety first and replace the drives, what do you recommend?</P><P>Thank you</P> Fri, 26 Oct 2018 08:59:23 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/hdd-failure-or-maybe-not/m-p/7023308#M164426 Eifelaner 2018-10-26T08:59:23Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/hdd-failure-or-maybe-not/m-p/7023938#M164480 <P>Hi,</P><P><A href="https://1drv.ms/u/s!AipGro0t2cicn4sgJkDBKDHiV-0vGw" target="_blank" rel="nofollow noopener noreferrer">M Log Viewer</A>,&nbsp;<A href="https://1drv.ms/u/s!AipGro0t2cicn4shsK2XBKU6n0Z9vA" target="_blank" rel="nofollow noopener noreferrer">Array Configuration Utilit</A>, &amp;&nbsp;<A href="https://1drv.ms/u/s!AipGro0t2cicn4sij8FWGVcpFs2iZg" target="_blank" rel="nofollow noopener noreferrer">LEDs up front</A>&nbsp;are not working, it takes me no where.</P><P>However, if there is an error in log and pointing to any drive then you should replace it.</P><P>Regards,</P><P>Sudhir</P><P>&nbsp;</P> Thu, 01 Nov 2018 02:33:36 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/hdd-failure-or-maybe-not/m-p/7023938#M164480 sudhirsingh 2018-11-01T02:33:36Z