topic Conrep not working on Server 2016, Gen10 DL360 in ProLiant Servers (ML,DL,SL)

Conrep not working on Server 2016, Gen10 DL360

ehodges — Thu, 29 Nov 2018 16:56:25 GMT

I cannot get conrep to work on a Gen10 DL360 server running Windows Server 2016. I take the following steps:

From the scripting toolkit (v. 11.20), copy hpsstkio.sys to C:\Windows\System32\drivers
Make sure the file is Unblocked
Install the CHIF ilo driver
Unzip the contents of the HP scripting toolkit (v. 11.20) onto the server
Run, for example, "conrep -s -f current.xml"

The output on the screen is as follows:

c:\Program Files\HP\Toolkit>conrep -s -f current.xml
conrep 5.3.0.0 - HPE Scripting Toolkit Configuration Replication Program
(c) Copyright 2013,2017 Hewlett Packard Enterprise Development LP

        System Type:                    ProLiant DL360 Gen10
        ROM Date   :                    06/20/2018
        ROM Family :                    U32
        Processor Manufacturer :        Intel(R) Corporation

XML System Configuration: conrep_gen10.xml
Hardware   Configuration: current.xml
        Global Restriction: [5.00                            ]                  OK


Platform check:
                : [Gen10               ]        match

However, no file is created. Running "echo %errorlevel%" yields: -1073741819. So it definitely didn't execute properly but I don't know what the error code means.

Any help would be appreciated.

Re: Conrep not working on Server 2016, Gen10 DL360

ronissac — Tue, 19 Nov 2024 06:20:56 GMT

Hi ,

Please refer to the below document for steps to use the CONREP utility

https://support.hpe.com/hpsc/doc/public/display?docId=a00017070en_us

Page 28.

If the issue still persists, Please log a case with HPE support team by following the below link

https://support.hpe.com/connect/s/createcase

Regards

Ronny

If you feel this was helpful please click the KUDOS! Thumbs below!

[Moderator edit: Updated the link.]

Re: Conrep not working on Server 2016, Gen10 DL360

ronissac — Fri, 07 Dec 2018 03:53:06 GMT

Please let know if you need any further assistance with this case

This will help for everyone who are all following your forum.
If you feel this was helpful please click the KUDOS! Thumbs below!

Regards

Ronny

Re: Conrep not working on Server 2016, Gen10 DL360

ehodges — Tue, 11 Dec 2018 16:00:27 GMT

Did you ever get this issue resoved? I am having exactly the same problem.

Re: Conrep not working on Server 2016, Gen10 DL360

DrFirestone — Mon, 18 Nov 2024 20:14:08 GMT

Has anyone managed to resolve the issue with no file being created? I have DL360G7 and it seems to run fine, then finishes with no error code, but "echo %errorlevel%" also results in -1073741819 for me too...

conrep -s -f saveconfig.dat
conrep 5.6.0.0 - HPE Scripting Toolkit Configuration Replication Program
(c) Copyright 2013,2017 Hewlett Packard Enterprise Development LP

System Type: ProLiant DL360 G7
ROM Date : 05/21/2018
ROM Family : P68
Processor Manufacturer : Intel

XML System Configuration: conrep.xml
Hardware Configuration: saveconfig.dat
Global Restriction: [3.40 ] OK

Platform check:
: [ProLiant DL120 G7 ] no match
: [ProLiant ML110 G7 ] no match
: [ProLiant DL3 ] match
: [ProLiant ML3 ] no match
: [ProLiant DL5 ] no match
: [ProLiant ML5 ] no match
: [ProLiant DL7 ] no match
: [ProLiant DL9 ] no match
: [ProLiant BL ] no match
: [ProLiant XW ] no match
: [ProLiant WS ] no match
: [ProLiant SE ] no match
: [ProLiant SL4 ] no match
: [ProLiant SL3 ] no match
: [ProLiant SL2 ] no match
: [ProLiant DL160 Gen8 ] no match
: [ProLiant SL160 Gen8 ] no match
: [ProLiant SL140 ] no match
: [ProLiant WS460c Gen8 WS Blade] no match
: [ProLiant MicroServer Gen8] no match
: [StoreEasy ] no match
: [FlexServer ] no match
: [FlexStorage ] no match
: [3PAR ] no match
: [ProLiant ML10 ] no match
: [Gen9 ] no match
: [ProLiant XL ] no match
: [SE2160w Server ] no match
: [C1030h ] no match
: [UIS ] no match
: [Apollo ] no match
: [EC200a ] no match
: [TM200 ] no match

Re: Conrep not working on Server 2016, Gen10 DL360

Sunitha_Mod — Wed, 20 Nov 2024 07:10:19 GMT

Hello @DrFirestone,

Thank you for writing to us!

You might want to consider creating a new topic by utilizing the "New Discussion" button if you are facing any issues, as this will not only enhance visibility compared to the old topic but also boost your chances of receiving responses from experts.