ProLiant ML350e Gen8 v2 Raid driver

endabliu — Mon, 10 Dec 2018 16:30:06 GMT

Hello,

After the last power failure my server will not start, I still get the recovery mode, but I can not do anything there because I can not see the hard drivers (partition), it seems to me that there are no Raid drivers in the system or files are corrupted. I tried to boot from the windows server installation CD to run cmd and try to repair, but from this point also does not see the hard drive because there is probably no driver. Where can I download the driver? I only see Linux drivers on the page https://support.hpe.com/hpesc/public/home/driverHome?pmasr=0&sp4ts.oid=5449156. I will just add that i have raid 1 , hard drivers are witohut bad sectors.

Re: ProLiant ML350e Gen8 v2 Raid driver

Bunsol — Thu, 20 Dec 2018 03:58:41 GMT

Hi Endabliu,

Good Day. Please use the below link to download the drivers:-

https://support.hpe.com/hpesc/public/home/driverHome?sp4ts.oid=5449156

Select the model of the server first or enter it on the search bacr on top

Select driver and downloads and then select the operating system.

Select driver and search for the controller driver depending on the model of the controller.

If further issues are faced then request you to log a case with us using the below portal:-

https://support.hpe.com/hpesc/home

Regards,

Bunsol.

topic ProLiant ML350e Gen8 v2 Raid driver in ProLiant Servers (ML,DL,SL)

ProLiant ML350e Gen8 v2 Raid driver

Re: ProLiant ML350e Gen8 v2 Raid driver