topic Re: HP USB KEY UTILITY cannot process SPP-2019-03 in ProLiant Servers (ML,DL,SL)

HP USB KEY UTILITY cannot process SPP-2019-03

ArunKanth — Fri, 26 Apr 2019 08:45:42 GMT

hpe usb key utility not working i tried

1)Hpe usb key ulitity latest version

2)Rufus

3)Iso to Usb

tried But No Luck

Re: HP USB KEY UTILITY cannot process SPP-2019-03

Torsten. — Sat, 27 Apr 2019 08:30:28 GMT

On Windows?
Consider to run the tool "as Administrator"

Re: HP USB KEY UTILITY cannot process SPP-2019-03

ArunKanth — Tue, 30 Apr 2019 12:54:52 GMT

Tried but not working

Re: HP USB KEY UTILITY cannot process SPP-2019-03

Torsten. — Tue, 30 Apr 2019 12:56:22 GMT

Consider also to compare the checksum of the ISO file.

Re: HP USB KEY UTILITY cannot process SPP-2019-03

ArunKanth — Wed, 08 May 2019 11:06:10 GMT

Compare the checksum file also

run as admin aslo

still not working

Re: HP USB KEY UTILITY cannot process SPP-2019-03

R_Raj — Wed, 15 May 2019 11:26:05 GMT

Hello ,

Please follow the steps below

1. Download the required version of SPP .

2. Make sure USB drive used is greater than 4GB and less than 32GB .

3. Mount the SPP ISO to a PC and navigate to SPP2019030/usb/usbkey and execute the usbkey.exe as Administrator Privileges .Make sure the Usb drive is plugged in and follow the usb wizard .

In case if there is any further issue . Please share a detailed description about the error .

Regards

Re: HP USB KEY UTILITY cannot process SPP-2019-03

riahc3 — Tue, 06 Aug 2019 12:33:44 GMT

That doesnt work either. It freezes in a not responding state.

Re: HP USB KEY UTILITY cannot process SPP-2019-03

Jimmy Vance — Tue, 06 Aug 2019 14:36:30 GMT

@riahc3 wrote:
That doesnt work either. It freezes in a not responding state.

The USB key utility in SPP2019030 works as expected. I just used it to build the SPP on a generic 16GB stick.

Re: HP USB KEY UTILITY cannot process SPP-2019-03

riahc3 — Thu, 08 Aug 2019 14:52:44 GMT

It is not working. The process goes into a non responding state and does nothing. Stays there, hours and hours. Resource Monitor shows no activity.

I've tried different USB, ports, computers..... nothing

Re: HP USB KEY UTILITY cannot process SPP-2019-03

Torsten. — Thu, 08 Aug 2019 19:16:23 GMT

you are using the tool included within the ISO?
Any restrictions (Group policies) regarding USB in your organisation?

Re: HP USB KEY UTILITY cannot process SPP-2019-03

dargrotek — Sun, 15 Sep 2019 21:11:29 GMT

I'm having the same problem as ArunKanth. Using v3.0.0 of the usb tool (which says support for win10 as per here https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_360731071b404454b454390208#tab-history) the software freezes on "Formatting USB Key..."

Tested the exact same as they have, fresh download, multiple computers, run as admin etc etc etc. These are stand alone computers that are not under any sort of GPO.

(Forgot to add, it doesnt seem to be SPP Version related. Tried different ISOs in case there was an weird issue with the tool and the one i was trying to use. All affected.)

Re: HP USB KEY UTILITY cannot process SPP-2019-03

StianR — Tue, 07 Jan 2020 17:26:10 GMT

I had the same issue. I made it work by mounting the ISO and choose the DVD as source insted of the ISO.

Re: HP USB KEY UTILITY cannot process SPP-2019-03

agw2 — Mon, 21 Dec 2020 21:25:37 GMT

I had the same issue. I had to open disk management and remove all volumes from the USB stick, format it, then create a simple partition on the USB stick, then FINALLY the USB Key Utility started working.