Conrep Error Code : 2 Invalid dat file

technowooki — Thu, 16 May 2019 05:59:46 GMT

Hi i can not load my configuration File with conrep.exe. I have a HPE Gen 10 DL380 Server.

Conrep output:

x:\Windows\tools>conrep.exe -l -x conrep_gen10.xml -f .\input\biosConfig.xml
conrep 5.3.0.0 - HPE Scripting Toolkit Configuration Replication Program
(c) Copyright 2013,2017 Hewlett Packard Enterprise Development LP

        System Type:                    ProLiant DL380 Gen10
        ROM Date   :                    04/18/2019
        ROM Family :                    U30
        Processor Manufacturer :        Intel(R) Corporation

XML System Configuration: conrep_gen10.xml
Hardware   Configuration: .\input\biosConfig.xml
        Global Restriction: [3.40                            ]                  OK


Platform check:
                : [ProLiant DL120 G7   ]        no match
                : [ProLiant ML110 G7   ]        no match
                : [ProLiant DL3        ]        match
                : [ProLiant ML3        ]        no match
                : [ProLiant DL5        ]        no match
                : [ProLiant ML5        ]        no match
                : [ProLiant DL7        ]        no match
                : [ProLiant DL9        ]        no match
                : [ProLiant BL         ]        no match
                : [ProLiant XW         ]        no match
                : [ProLiant WS         ]        no match
                : [ProLiant SE         ]        no match
                : [ProLiant SL4        ]        no match
                : [ProLiant SL3        ]        no match
                : [ProLiant SL2        ]        no match
                : [ProLiant DL160 Gen8 ]        no match
                : [ProLiant SL160 Gen8 ]        no match
                : [ProLiant SL140      ]        no match
                : [ProLiant WS460c Gen8 WS Blade]       no match
                : [ProLiant MicroServer Gen8]   no match
                : [StoreEasy           ]        no match
                : [FlexServer          ]        no match
                : [FlexStorage         ]        no match
                : [3PAR                ]        no match
                : [ProLiant ML10       ]        no match
                : [Gen9                ]        no match
                : [ProLiant XL         ]        no match
                : [SE2160w Server      ]        no match
                : [C1030h              ]        no match
                : [UIS                 ]        no match
                : [Apollo              ]        no match
                : [EC200a              ]        no match
                : [TM200               ]        no match

Loading configuration data from .\input\biosConfig.xml

ERROR: Invalid dat file entry Setup_Browser_Selection

Conrep return code: 2

And this is my configuration File .\input\biosConfig.xml

<Conrep>
	<global>
	<fileversion>1.12</fileversion>
	<minimumconrepversion>5.00</minimumconrepversion>
	<platforms>
		<platform>Gen10</platform>
	</platforms>
	<onmismatch>exception</onmismatch>
	</global>
<!-- Language -->
	<Section name="Language">English</Section>
	<Section name="Setup_Browser_Selection">Auto</Section>	
<!-- Workload Profile -->
	<Section name="Workload_Profile">High_Performance_Compute</Section>
<!-- Virtualization Options -->
	<Section name="Intel_VT">Disabled</Section>
	<Section name="AMD_VT">Disabled</Section>
	<Section name="AMD_IOMMU">Disabled</Section>
	<Section name="Intel_VT-d">Disabled</Section>
	<Section name="SR-IOV">Disabled</Section>
<!-- Processor Options -->
	<Section name="Intel_Hyper-Threading">Disabled</Section>	
<!-- Power and Performance Options -->
	<Section name="Power_Regulator">Static_High_Performance</Section>	
	<Section name="Minimum_Processor_Idle_Power_Core_C-State">No_C-states</Section>
	<Section name="Minimum_Processor_Idle_Power_Package_C-State">No_C-states</Section>
	<Section name="Energy/Performance_Bias">Maximum_Performance</Section>
	<Section name="Collaborative_Power_Control">Disabled</Section>
	<Section name="Intel_DMI_Link_Frequency">Auto</Section>
	<Section name="Intel_Turbo_Boost_Technology">Enabled</Section>
	<Section name="NUMA_Group_Size_Optimization">Clustered</Section>
	<Section name="Energy_Efficient_Turbo">Disabled</Section>
	<Section name="Uncore_Frequency_Scaling">Maximum</Section>		
<!-- Power and Performance Options / I/O Options -->
	<Section name="Intel_NIC_DMA_Channels_(IOAT)">Enabled</Section>	
<!-- Power and Performance Options / Processor Prefetcher Options -->
	<Section name="HW_Prefetcher">Enabled</Section>
	<Section name="Adjacent_Sector_Prefetch">Enabled</Section>
	<Section name="DCU_Stream_Prefetcher">Enabled</Section>
	<Section name="DCU_IP_Prefetcher">Enabled</Section>	
<!-- Advanced Options / Fan and Thermal Options -->
	<Section name="Thermal_Configuration">Optimal_Cooling</Section>		
<!-- Memory Options -->
	<Section name="Memory_Refresh_Rate">1x_Refresh</Section>
	<Section name="Channel_Interleaving">Enabled</Section>
	<Section name="Advanced_Memory_Protection">ADDDC_Support</Section>	
<!-- Power and Performance Options / Intel UPI Options -->
	<Section name="Intel_UPI_Link_Power_Management">Disabled</Section>	
<!-- System Options / Diagnostics Options -->
	<Section name="Processor_x2APIC_Support">Disabled</Section>		
<!-- Boot Options -->
	<Section name="Boot_Mode">UEFI_Mode</Section>
<!-- Date and Time -->
	<Section name="Time_Format">Coordinated_Universal_Time_(UTC)</Section>
</Conrep>

Re: Conrep Error Code : 2 Invalid dat file

technowooki — Fri, 17 May 2019 06:28:07 GMT

I have founded a solution. I had not the neweset Scriptingtoolkit from HPE. It was the Version 11.2 and it gives a Version 11.3 since April 2019.

cheers!

topic Conrep Error Code : 2 Invalid dat file in ProLiant Servers (ML,DL,SL)

Conrep Error Code : 2 Invalid dat file

Re: Conrep Error Code : 2 Invalid dat file