topic Re: ML350p Gen8 - Sata motherboard connector speeds in ProLiant Servers (ML,DL,SL)

ML350p Gen8 - Sata motherboard connector speeds

Palustec — Mon, 23 Sep 2019 13:13:09 GMT

Hello everyone,

There are 3 sata connectors on the server motherboard (one used by optical drive). Can someone tell me if they are Sata II or Sata III???

I was disappointed to learn the p420i runs at Sata II with Sata drives attached instead of SAS.

TIA

Palustec

Re: ML350p Gen8 - Sata motherboard connector speeds

sudhirsingh — Wed, 25 Sep 2019 06:07:09 GMT

Hi,

As for my understanding embedded SATA ports are designated for the optical drives and it runs at SATA 1.5 speed.

also

HP Smart Array P420i Controller-Specification

Disk Drive and Enclosure

6 Gb/s SAS (Serial Attached SCSI)

Interface - Transfer rate

3 Gb/s SATA (Serial ATA)

FYI,

SATA I (revision 1.x) interface, formally known as SATA 1.5Gb/s, is the first generation SATA interface running at 1.5 Gb/s. The bandwidth throughput, which is supported by the interface, is up to 150MB/s.

SATA II (revision 2.x) interface, formally known as SATA 3Gb/s, is a second generation SATA interface running at 3.0 Gb/s. The bandwidth throughput, which is supported by the interface, is up to 300MB/s.

SATA III (revision 3.x) interface, formally known as SATA 6Gb/s, is a third generation SATA interface running at 6.0Gb/s. The bandwidth throughput, which is supported by the interface, is up to 600MB/s. This interface is backwards compatible with SATA 3 Gb/s interface.

Regards,

Sudhir

Re: ML350p Gen8 - Sata motherboard connector speeds

FlostonParadise — Thu, 07 May 2020 13:59:35 GMT

But in this

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c03243992

Disk drive and enclosure

6 Gb/s SAS (Serial Attached SCSI)

Interface - transfer rate

6 Gb/s SATA (Serial ATA)

Re: ML350p Gen8 - Sata motherboard connector speeds

rmay_bk — Thu, 07 May 2020 15:44:12 GMT

I once put an SSD on a Gen8 optical drive SATA port. It silently corrupted quite a bit of data.

Not sure if it was just a faulty port or if having a high speed drive on this port is outside of HPE's design and test parameters. Either way, be careful.

Re: ML350p Gen8 - Sata motherboard connector speeds

6BQ5 — Sun, 10 May 2020 20:10:40 GMT

My ATTO benchmark speeds on the SATA ports confirm a maximum speed of 150 MB/s.