topic Re: Unable to fix bmc 601 error [ML150G6] in ProLiant Servers (ML,DL,SL)

Unable to fix bmc 601 error [ML150G6]

alexmeteenserve — Mon, 19 Feb 2018 21:22:46 GMT

Hello All,

As the title suggest I have a BMC 601 error on my HP Proliant ML150G6, and I've been unable to fix it thus far.

A post suggested that I need to flash the lights out software to fix this, but I can't find anywhere to download this or how to flash it. I've inserted an ethernet jack in both the ports and I read somewhere I should set the IP to static in my bios > advanced > ipmi, but all ip related options there are greyed out.

I have installed an E5540 with 2x4GB and a 250GB harddisk with Windows Server 2008 R2.

I hope I haven't left out anything but feel free to ask otherwise.

Re: Unable to fix bmc 601 error [ML150G6]

krasinka1409 — Tue, 20 Feb 2018 07:28:54 GMT

Hi ,

you may try to reser the BMC Controller (iLO) using the BMC Reset/Recovery Jumpers, see Maintenance Guide:

http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c01706108-8.pdf

Afterward, try to install the BMC Firmware, available here:

https://support.hpe.com/hpsc/swd/public/detail?sp4ts.oid=3884326&swItemId=MTX_f35f114acda543568e47f527ca&swEnvOid=4184#tab1

Re: Unable to fix bmc 601 error [ML150G6]

alexmeteenserve — Tue, 20 Feb 2018 13:24:13 GMT

I tried it, but it says the hardware is not found. I've attached a screenshot.

Re: Unable to fix bmc 601 error [ML150G6]

alexmeteenserve — Tue, 20 Feb 2018 13:33:06 GMT

But when I switch the jumper to recovery mode and try to install it looks like it works, says it could take up to 10 minutes and is done in a second.

Re: Unable to fix bmc 601 error [ML150G6]

COSgizycko — Tue, 22 Oct 2019 06:26:13 GMT

the same problem after add secound CPU any

update bios reset bios

update bmc

any solution ?

Re: Unable to fix bmc 601 error [ML150G6]

COSgizycko — Wed, 23 Oct 2019 10:23:58 GMT

when try to update another time when boot program I press cancel becouse bmc version is up of date .

When serwer up upgrade bmc finished menu up

And fixit

4 try bmc reinstall on bmc recovery mode or not end succes