Deploy Server using USB with Intelligent Provisioning

fsaraiva — Sun, 23 Feb 2020 11:09:05 GMT

Hi,

I have a server HPE ProLiant DL320e Gen8 v2 with NVRAM error to read or reinstall Intelligent Provisioning, it is not a production server and it is out of HPE support contract. But I need to reinstall the Operating System (which is Linux) and I'm facing some errors due a missing RAID driver.

There is a way to boot the Intelligent Provisioning from a USB and iniatiate this installation this way? Like the old HP Smart Start?

Thanks

Re: Deploy Server using USB with Intelligent Provisioning

SanjeevGoyal — Mon, 24 Feb 2020 12:35:28 GMT

Hello,

Please follow customer advisory.

Advisory: (Revision) HP ProLiant Gen8 and Gen9 Servers - How to Install/Reinstall Intelligent Provisioning (IP) if It Does Not Launch After Pressing F10 During Power-On Self-Test (POST)

https://support.hpe.com/hpesc/public/docDisplay?docId=c03693433

Intelligent Provisioning Recovery Media

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_a2b2caf8066e4a8b82a966d628#tab4

If the issue still persists use the latest SPP 8.1 for the Gen8 server.

NOTE: Make sure you have the complete data backup before use SPP 8.1

Service Pack for ProLiant

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_a2b2caf8066e4a8b82a966d628#tab4

Please let us know for further assistance.

If you feel this was helpful please click the KUDOS! thumb below!

Regards,

Sanjeev

topic Deploy Server using USB with Intelligent Provisioning in HPE ProLiant Servers (ML,DL,SL)

Deploy Server using USB with Intelligent Provisioning

Re: Deploy Server using USB with Intelligent Provisioning