topic Re: DL360p failed Logical Drive in ProLiant Servers (ML,DL,SL)

DL360p failed Logical Drive

KasheK — Mon, 09 Mar 2020 19:54:35 GMT

Hello guys,

I have new (refurbished) DL360p GEN8 server, installed WIN2019 , everything worked without any trouble until today, server won't boot to OS and red light is blinking ( critical issue ).
I just checked iLO and found out that there is some problem with Logical Drives, physical drives seems to be OK, there is no red light on them etc.

I have two 8TB drives in RAID 1 ( 1- logical drive - 2TB and 1- logical drive 5TB)

- Screenshot of iLO - https://snipboard.io/4MKHwx.jpg

Any idea how could I fix this issue please? Without replacing drives and reinstalling system again ?

Thanks in advance and have a nice day guys!

Re: DL360p failed Logical Drive

Kashyap02 — Tue, 10 Mar 2020 03:36:18 GMT

Do you see any RED / Amber LED on the HDDs?

If no, when you boot the server do you see F1 and F2 options duirng POST?

Select "F1" to continue with logical drive(s) disabled
Select "F2" to accept data loss and to re-enable logical drive(s)

Logical Drive failure can be caused due to multiple reasons. If you see the above message, press F2 to re-enable the logical drive. The data loss which it is referring to is the data on the cache.

Also, Win 2019 is not supported OS on Gen8 server :

https://techlibrary.hpe.com/us/en/enterprise/servers/supportmatrix/windows.aspx

Looking at the screenshot there is no disk failure and controller firwmare is updated to latest.

Re: DL360p failed Logical Drive

Kashyap02 — Sun, 15 Mar 2020 15:44:37 GMT

@KasheK

Did you try the above steps? Did it help to resolve the issue?