topic Re: Compatible GPU for HP DL380p Gen8 Server in ProLiant Servers (ML,DL,SL)

Compatible GPU for HP DL380p Gen8 Server

Shazib083 — Fri, 24 Nov 2017 19:06:55 GMT

Hi,

I have a HP proliant DL380p G8 server. I need to know which Graphics card is compitible with this server for High performance gaming.

Thanks in Advance

Re: Compatible GPU for HP DL380p Gen8 Server

Fred4 — Sat, 25 Nov 2017 06:47:20 GMT

Hello

Look at the product information for the supported GPU for this server in the core option section

http://h20195.www2.hpe.com/v2/GetHTML.aspx?docname=c04123238

Regards

Re: Compatible GPU for HP DL380p Gen8 Server

Shazib083 — Sat, 25 Nov 2017 16:45:04 GMT

Thanks a lot

Re: Compatible GPU for HP DL380p Gen8 Server

Galvatron — Fri, 28 Feb 2020 02:42:45 GMT

which gpu did you end up putting in?

Re: Compatible GPU for HP DL380p Gen8 Server

FloorNL — Thu, 26 Mar 2020 06:25:49 GMT

Hi @Galvatron ,

I just upgraded to a MSI GeForce GTX 1650 4GT LP in my Gen8.
Lots of folks already had 1050`s but this is quite the performance boost.

It does require some modification at the back.
The MSI comes with a low profile slot. but even then I had to Dremel a bit to get it to fit.
I could post some pictures if you`re interested.

Re: Compatible GPU for HP DL380p Gen8 Server

Galvatron — Thu, 26 Mar 2020 13:31:22 GMT

wow, this is great news.

if you could post some pics, that'd be great also.

congrats btw.

Re: Compatible GPU for HP DL380p Gen8 Server

AndyToots — Wed, 19 Aug 2020 20:22:56 GMT

Hi just reading this thread and wondering if after replacing the GPU you have the same issue as myself in that the fans run constantly at 54%. Doesnt matter what GPU i put in my DL380e G8 they all make the fans kick in. Is there a workround to stop this so i could install a better GPU.

Thanks

Re: Compatible GPU for HP DL380p Gen8 Server

greg_gorrell — Tue, 25 Aug 2020 17:32:24 GMT

Youre going to have this happen regardless. It is how the system is designed, and by adding a GPU the machine will require increased cooling. There are two ways to solve this, one being that iLO firmware hack that will allow you to adjust the fan curves and the second method is using a microcontroller to create a PWM controller to run the fans. Neither of these are something I'd reccomend to someone unless they have some experience and are able to troubleshoot effectively. That said, this is an enterprise grade server and not a home theater PC. It requires cooling, and like most other servers, it will be loud. Just as I wouldn't buy a Tesla Model 3 to take offroading in the woods, I wouldn't buy an HP Proliant expecting to keep it in my bedroom.

Re: Compatible GPU for HP DL380p Gen8 Server

Bkjjohn — Sat, 03 Oct 2020 17:53:55 GMT

Do yours run at 52 % fan speed and how did you power the GPU? Thank you

Re: Compatible GPU for HP DL380p Gen8 Server

FloorNL — Sat, 03 Oct 2020 17:55:38 GMT

No idea about fanspeed, I'll have a look. Powered through regular gen8 psu.

Re: Compatible GPU for HP DL380p Gen8 Server

FloorNL — Mon, 05 Oct 2020 07:17:53 GMT

Using MSI afterburner software. Fan is at 30/40% when on regular desktop work.

Re: Compatible GPU for HP DL380p Gen8 Server

FloorNL — Mon, 05 Oct 2020 07:43:28 GMT

Pictures.
Now that I know that the GPU works I would have modified the bracket instead of the case. (And yes I could have tested it without a bracket )

Take the full size bracket off

Put the small sized backet on.If you do decide to take a dremel to the case remove the motherboard, metal filings and PCBs don't play nice together.

The bottom of the bracket wouldn't go in properly. So I had to make some room there too.

Doesn't leave much room but works great!

As you can see at the bottom right, it also needs space there.