topic Re: DL380 G10: Can not install Window Server 2016 in ProLiant Servers (ML,DL,SL)

DL380 G10: Can not install Window Server 2016

tiennghia — Fri, 04 May 2018 02:02:37 GMT

Hi all,

I got trouble with installation Window server 2016 on DL380 G10 server.

I was try to deploy by Intelligent Provisioning with Window Server 2016 ISO file, but installation process breakdown while installing process (Installing around ~86%).

The ISO file is no problem, I tested with another devices.

I wondered is there any install driver for RAID controller, part model is : HPE Smart Array P408i-a SR Gen10.

PS: I set all BIOS setting as default.

Thank you.

Re: DL380 G10: Can not install Window Server 2016

krasinka1409 — Fri, 04 May 2018 17:05:21 GMT

Hello,

there may be an issue with intelligent provisioning. You may try to update the IP using following iSO :

https://support.hpe.com/hpsc/swd/public/detail?sp4ts.oid=1008862660&swItemId=MTX_18e38f1284c84e8a98eb1ed4b3&swEnvOid=4184#tab1

If issue persists, install the OS manualy (booting from OS media) and import the controller driver during installation when prompt:

https://support.hpe.com/hpsc/swd/public/detail?sp4ts.oid=1009955119&swItemId=MTX_feeeea3c64e04e47a684c2961d&swEnvOid=4184#tab1

Re: DL380 G10: Can not install Window Server 2016

tiennghia — Mon, 07 May 2018 09:31:06 GMT

Hello, Thank for your reply.

I got remote support from HPE, and have to remove FC card for installing OS, it's very strange.

I hope that would not happen again once replace the new FC card.

Thank you.

Re: DL380 G10: Can not install Window Server 2016

EEALFA21 — Wed, 19 Sep 2018 20:57:36 GMT

F9 to Disable FC card then install Windows2016 After installation reactivate de FC card

Re: DL380 G10: Can not install Window Server 2016

mikewinn — Fri, 22 Feb 2019 18:49:53 GMT

What is an FC card and where do you disable it?

Re: DL380 G10: Can not install Window Server 2016

airbibo — Thu, 11 Apr 2019 20:12:41 GMT

This is the reason. You need to disable the IOMMU in Bios. DESCRIPTION

On an HPE ProLiant Gen10 Server (AMD-based) and using Intelligent Provisioning with IOMMU enabled and installing any version of Microsoft Windows Server, the operating system will be unable to run without a hot fix from Microsoft.

Because of the way that Windows is installed, all Windows Server OS versions installed through the F10 function will fail.

SCOPE

Any HPE ProLiant Gen10 Server (AMD-based) using Intelligent Provisioning with IOMMU enabled and running any version of Microsoft Windows Server.

RESOLUTION

This is a Microsoft and HPE known issue.

As a workaround, disable IOMMU, install the Windows Server OS as usual, and then apply all the needed hotfixes from Microsoft before reactivating IOMMU in the BIOS configuration or the Intelligent Provisioning BIOS setup, if required

Re: DL380 G10: Can not install Window Server 2016

Jimmy Vance — Fri, 12 Apr 2019 02:18:04 GMT

@airbibo wrote:
This is the reason. You need to disable the IOMMU in Bios. DESCRIPTION
On an HPE ProLiant Gen10 Server (AMD-based) and using Intelligent Provisioning with IOMMU enabled and installing any version of Microsoft Windows Server, the operating system will be unable to run without a hot fix from Microsoft.
Because of the way that Windows is installed, all Windows Server OS versions installed through the F10 function will fail.
SCOPE
Any HPE ProLiant Gen10 Server (AMD-based) using Intelligent Provisioning with IOMMU enabled and running any version of Microsoft Windows Server.
RESOLUTION
This is a Microsoft and HPE known issue.
As a workaround, disable IOMMU, install the Windows Server OS as usual, and then apply all the needed hotfixes from Microsoft before reactivating IOMMU in the BIOS configuration or the Intelligent Provisioning BIOS setup, if required

The DL380 is not an AMD based server. This customer advisory is for AMD based servers

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00046081en_us&docLocale=en_US

Hardware Platforms Affected: HPE ProLiant DL385 Gen10 Server, HPE ProLiant DL325 Gen10 Server

Re: DL380 G10: Can not install Window Server 2016

SBFact — Wed, 01 May 2019 12:51:47 GMT

I called in for assistance. We changed boot order to boot from ISO, but had drivers from here:

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_94ecae7363534a82b939888db5

Issue was once the iso would actually read (you can't do assisted install or it will fail) it would not read the drives. Having this driver allowed it to see the drives and install on them. Hope this helps!

I would highly recommend calling in though if you are stuck, they helped me in record time.

Re: DL380 G10: Can not install Window Server 2016

lavanyareddy563 — Mon, 26 Aug 2019 12:10:26 GMT

Hi all,

I need to remove user data and OS from HP PROLIANT DL360 GEN10 machine.

can any one help me over here.

I tried it by installing windows image during which I am formating the drivers. This is working for GEN9 machines but while I am trying to do same for GEN10 servers during the installation I am getting error message like no drivers found, even I am unable to see any driver.

Thank you.

Re: DL380 G10: Can not install Window Server 2016

ramesh28 — Fri, 31 Jan 2020 08:34:05 GMT

I have disabled FC and tried but still cannot install, its stuck at OS preparing installation page around 76% stuck when I use IP manual option instead of assisting, If I use assisting WINPE driver copying state its stucked

Re: DL380 G10: Can not install Window Server 2016

ramesh28 — Mon, 03 Feb 2020 08:00:26 GMT

Please advise how to update the IP.

I have used HPE USB utility for the ISO

Navigate to perform maintenance, select the firmware and try to search its giving option to apply via the internet only.

Note we are able to install Esxi or windows core 2016 successfully, but if we try installing the desktop experience its failed after 76 to 80 %.

Re: DL380 G10: Can not install Window Server 2016

SGS1965 — Wed, 09 Jun 2021 11:24:48 GMT

Thank SBFact! that helps me.
In my case, I downloaded cp044563.exe and cp044563.compsig, and uncompress in a pendrive.
I connected pendrive to the Proliant and selecte Smart Array P408i-a from the list. After refresh the disk window it appear all available disks.