topic Re: Setting up HP ML30 Gen 10 in ProLiant Servers (ML,DL,SL)

Setting up HP ML30 Gen 10

Raphael_George — Sat, 12 Jun 2021 10:06:22 GMT

Hi guys. So my employer decided we needed a file server and we purchased the ML30 Gen10 server.
Unfortunately i have never used a server before, just the normal PCs.
So i powered on for the first time and it keeps going back and forth on the bios page. It also says no network adapter is found?
How do i get past this? From my experience of normal PCs, windows can boot without network drivers installed or updated.

Re: Setting up HP ML30 Gen 10

ManBha — Mon, 14 Jun 2021 01:23:31 GMT

Hello,

This might be because the server is trying to boot from network.

Please do confirm if the RAID is configured and OS is installed.

I hope the below documents help you in OS installation.

https://www.youtube.com/watch?v=JR5Pjk5_1LQ

If s100i controller is installed: https://support.hpe.com/hpesc/public/docDisplay?docId=a00036381en_us

Disclaimer: One or more of the links above will take you outside the HPE website. HPE is not responsible for content outside of its domain

Thanks.

Re: Setting up HP ML30 Gen 10

mysy — Mon, 14 Jun 2021 08:21:28 GMT

you need sure when you config the sever, it include HDD/SDD.

And you need install the win Server or Linux by yourself.