topic Re: HP Smart Array P420i : enable HBA mode doesn`t work in ProLiant Servers (ML,DL,SL)

HP Smart Array P420i : enable HBA mode doesn`t work

Wolfi666 — Tue, 17 Aug 2021 05:39:53 GMT

Hi, I have a ML350p server with a P420i onboard. Firmware is 8.00.

I startet the smart storage administrator to change to HBA mode like in this post, bute there is no "HBA mode" option. (like in this thread:

https://community.hpe.com/t5/ProLiant-Servers-ML-DL-SL/DL380p-Gen8-P420i-exit-out-of-HBA-mode/m-p/6939006/highlight/true#M156401

What can I do?

best regards

Wolfgang

Re: HP Smart Array P420i : enable HBA mode doesn`t work

Ihaqueit — Tue, 10 Aug 2021 16:08:27 GMT

1. I understand that you are looking to set the controller to HBA mode.

# ssacli controller all modify hbamode=on forced

Please check of you have disabled (AHCI mode) the onboard B120i controller from RBSU. - To ensure of the error is not for the onboard controller.

2. What happens if you try to re-configure RAID volume (1 or 0 but no RAID 5 since no cache is present) instead of changing to HBA mode? Do you see any issue?

3. Also, did you try with a different version of ssacli? Maybe you can try with an older version which is called hpacucli?

By default, it should be RAID mode for the P420 controller. Even if the cache is not installed on the P420 controller, it should allow non-parity RAID creation Example: RAID 0 or RAID 1

Please try booting from offline SSA and check. Before that please check if the B120i is disabled in BIOS.

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_50309f0541d14018bb674c59b8

If the issue persists, try doing a BIOS defaults and then disable B120i and check. If nogo then we may have to look at the firmware and other details from the logs to further isolate.

Please log a support ticket to get this investigated: https://pg-receiver-pro.glb.itcs.hpe.com/WclWeb/WclEntry.aspx

Re: HP Smart Array P420i : enable HBA mode doesn`t work

SanjeevGoyal — Sat, 14 Aug 2021 05:47:33 GMT

Hello,

SA P420i doesn't support HBA mode,follow the below link for more clarificatios.

HPE Smart Array P420i Controller
https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=c04111534

As per shared link or snaps, using SA P440ar controller.
SA P440ar is supported HBA mode.
HPE Smart Array P440 Controller

If you feel this was helpful please click the KUDOS! thumb below and accept the solution.
Regards,