Unable to enter ILO GUI after assigning ip

zt2021 — Thu, 28 Oct 2021 14:32:53 GMT

Greeting,

recently we help client to setup a HP Proliant DL380 gen 10 server (running Window server 2019) and had been told current iLO 5 are share with NIC port 1. after few test we still unable to get into the iLO GUI.

thing that i had try:

1) remove teaming (bonding port) assign 1 port for internet/ LAN usage, another port for iLO. But iLO is not working and window svr is not allow 2 different IP and gateway in both NIC port

2) remove link aggregation in switch, assign back to normal access vlan

3) only using port 1, port 2 is disable.

4) adding 2 IP in nic port 1, SVR and iLO IP.

i had attaced the iLO setting below

iLO 01

iLO 02

is there any setting is miss out or wrong? any help will apprecited

thank

Re: Unable to enter ILO GUI after assigning ip

zt2021 — Thu, 28 Oct 2021 07:40:52 GMT

Problem had been solved.

i assign an ip on port 2, now can enter iLO GUI

so mean:

port 1 : Server IP

port 2 : iLO IP range

we had VLAN, but no need to add VLAN in iLO setting

Re: Unable to enter ILO GUI after assigning ip

Anu_K — Thu, 28 Oct 2021 12:54:07 GMT

Glad to hear that your issue is resolved!

topic Unable to enter ILO GUI after assigning ip in ProLiant Servers (ML,DL,SL)

Unable to enter ILO GUI after assigning ip

Re: Unable to enter ILO GUI after assigning ip

Re: Unable to enter ILO GUI after assigning ip