topic Re: Proliant ML110 G7 memory upgrade in ProLiant Servers (ML,DL,SL)

Proliant ML110 G7 memory upgrade

gian125 — Mon, 20 Dec 2021 23:00:04 GMT

Hello All,

my ML110 G7 doesn't accept this HP part number: 500205-071, which is an 8GB memory chip.

Apparently the specs match the server requirements, so what's wrong with it?

Thanks for you time,

-GianLuca

support_s — Fri, 17 Dec 2021 09:13:55 GMT

System recommended content:

1. HP ProLiant ML110 Generation 7 (G7)

If the above information is helpful, then please click on "Thumbs Up/Kudo" icon.

Thank you for being a HPE community member.

Cali — Fri, 17 Dec 2021 14:32:47 GMT

Hi,

if you look in the QuickSpec of the Server, see:

HP ProLiant ML110 G7 Models
2GB or 4 GB of PC3-10600E DDR3 UDIMM running up to 1333MHz with memory kits installed.
Max: 16GB

So, this Server support only 2/4GB and needs unbuffered Memory (UDIMM), this is 8GB and Registered.
Check here: Document - HP ProLiant G7 Servers - Part Number Memory Matrix | HPE Support

Cali

gian125 — Fri, 17 Dec 2021 17:35:20 GMT

thanks for your kind reply.

I had seen that, but I also found:

Cali — Fri, 17 Dec 2021 18:33:43 GMT

He used Kingston KTH-PL313E/8G.
This are UDIMM (Unregistered), your are registered.
Cali

SanjeevGoyal — Mon, 20 Dec 2021 07:33:54 GMT

Hello,

This part number 500205-071 is not supported by this server.

Follow the below documents for more clarifications.

If you feel this was helpful please click the KUDOS! thumb below and accept the solution.
Regards,

gian125 — Mon, 20 Dec 2021 08:22:30 GMT

thanks, now everything is clear