topic Re: LLDP on ILO 5 in ProLiant Servers (ML,DL,SL)

LLDP on ILO 5

jul-deb — Tue, 22 Mar 2022 05:38:33 GMT

Hi,

I'm looking for information about enable LLDP on an ILO 5 dedicated port on a HPE Proliant DL360 gen 10 server.

Is LLDP work on ILO 5 ? If yes, how can I enable it?

Kind regards,

Julien

Re: LLDP on ILO 5

Ihaqueit — Wed, 16 Mar 2022 15:31:58 GMT

Connect iLO to the network through a production network or a dedicated management network.

If you need more information better to post the query on Network community.

Re: LLDP on ILO 5

jul-deb — Thu, 17 Mar 2022 08:22:43 GMT

Hi Ihaqueit, Hi community,

My ilo port is connected on my network (and up) but doesn't answer to LLDP request made by my switch. Do you know if LLDP can be enable on a dedicated Ilo port?

I would like to use Link Layer Discovery Protocol (LLDP) to get information about the server connected on each ports of my switch.

thank you for your help

Julien

Re: LLDP on ILO 5

Ihaqueit — Fri, 18 Mar 2022 16:57:23 GMT

To enable the LLDP, perform the following steps.

1. Press F9 at POST.

2. Select network adapter.

3. Select enable LLDP.

4. Save and reboot

Re: LLDP on ILO 5

Ihaqueit — Fri, 18 Mar 2022 22:59:04 GMT

Checkout this,

To enable the Link Layer Discovery Protocol (LLDP), perform the following
steps:

1. Press F9 at Power-On Self-Test (POST).
2. Select Network Adapter.
3. Select enable LLDP.
4. Save and reboot.

Re: LLDP on ILO 5

jul-deb — Mon, 21 Mar 2022 10:49:16 GMT

Hi Ihaqueit,

Thank you for your answer. My need is to enable LLDP protocol on a dedicated Ilo ports and not on a NIC of my Porliant DL360 Gen10 .

Do you know if LLD can be enabled on ILO5 dedicated port?

ILO firmware version is "2.55 Oct 01 2021"

Thant you for your help,

Julien

Re: LLDP on ILO 5

Ihaqueit — Mon, 21 Mar 2022 14:43:06 GMT

Use iLO Dedicated Network Port—Uses a NIC with a jack on the back of the server.The NIC handles iLO traffic only.

Better you raise a case with HPE support.

Re: LLDP on ILO 5

AmRa — Tue, 22 Mar 2022 05:36:30 GMT

Based on HPE Integrated Lights Out (iLO 5) for Gen10 Servers - Configuring iLO Network Settings article., there is

setting available to enable LLDP on ILO NIC.

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00026106en_us

However please raise support ticket with HPE technical support team for more information.

Re: LLDP on ILO 5

ranjeetbadhe — Tue, 05 Sep 2023 08:06:22 GMT

There is no such option in ILO to enable LLDP