topic Re: No drives when OS setups in HPE ProLiant Servers (ML,DL,SL)

No drives when OS setups

Alekhly — Wed, 23 Mar 2022 05:01:53 GMT

I am trying to setup OS (Windows or FreeBSD) on HPE Proliant DL20 Gen10 server
I create logical drive using HPE Smart Array S100i

But no drives were found during Windows setup

Re: No drives when OS setups

feigenL — Wed, 23 Mar 2022 04:09:07 GMT

Check this out:

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00026445en_us

Windows OS

The device driver for the HPE Smart Array S100i SR Gen10 SW RAID solution is not included with the Off-the-Shelf Microsoft Windows OS media. If user is installing the OS to a logical volume managed by the S100i SW RAID Solution, then user must ensure that the device driver is installed so that the windows installation will recognize the logical volume.

If user installs the OS using the assisted installation option in the intelligent provisioning software, the driver is automatically added during installation. No further action is required.

If user installs the OS without Intelligent Provisioning, user must manually inject the driverduring the OS installation from a USB drive.

So, try again to install windows, but this time, through the "Intelligent Provisioning" feature of the server.

The last option is to "inject" the device driver during the installation process, which is also explained on the link above.

Regards.

Query: No drives when OS setups

support_s — Tue, 29 Apr 2025 06:12:59 GMT

System recommended content:

1. ~~HPE ProLiant Servers - Hard Drive(s) Not Being Detected/Recognized During POST~~

( Link no longer working, kindly visit the Support Center for more information)

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

Re: No drives when OS setups

mansonJ — Mon, 25 Apr 2022 05:01:18 GMT

Thanks @feigenL . That helped me to get close to the Solution. Great!!