topic Re: dl 380 gen 10 showing error message while booting the windows 2016 in ProLiant Servers (ML,DL,SL)

dl 380 gen 10 showing error message while booting the windows 2016

pmetal — Thu, 13 Dec 2018 12:15:22 GMT

x:\windows\system32>hpev CQTESS
Error: deleting EV CQTESS

X:\windows\system32>exit /b 0

X:\windows\system32>

it will halt and cannot boot the 2016 server. help me

Re: dl 380 gen 10 showing error message while booting the windows 2016

Erdogan Temur — Fri, 14 Dec 2018 11:48:31 GMT

Hi,

update the HPE Intelligent Provisioning to the latest version.

Re: dl 380 gen 10 showing error message while booting the windows 2016

terry_00 — Thu, 20 Dec 2018 04:07:31 GMT

Hi Sirs,

We have the same problem as the TS.

After numerous restart, we were able to see windows setup but encountered another issue. A pop-up windows shows "Setup was unable to create a new system partition or locate an existing system partition..." then when press Ok, it goes back to the same error x:\windows\system32......

Aside to Initial Provisioning, we are using the latest version 3.20

Many thanks,

Re: dl 380 gen 10 showing error message while booting the windows 2016

MV3 — Fri, 21 Dec 2018 08:11:20 GMT

This error is seen on the server during the installation or after the first boot after installation.Reset or Flash the BIOS.

If the BIOS is corrupted, update BIOS firmware to latest version.

If issue is still persists on the server, use different Operating System ISO and Flash or update the HPE Intelligent Provisioning to the latest version..

I work for HPE.

Cheers

Re: dl 380 gen 10 showing error message while booting the windows 2016

dsshp — Fri, 21 Dec 2018 14:06:17 GMT

Hi I have exactly same error but with windows server 2019 instalation, IP is latest 3.21 bios is also latest 1.46.

HP please fix this

Re: dl 380 gen 10 showing error message while booting the windows 2016

Bob_Kelsall — Fri, 22 Feb 2019 20:00:41 GMT

Have same issue with a DL360 and Win S 2019, problem seems to be generated from script calling wpeinit.exe which ends with

exit /b 0

Windows is helpful here...
C:\WINDOWS\system32>exit /?

Quits the CMD.EXE program (command interpreter) or the current batch
script.

EXIT [/B] [exitCode]

/B specifies to exit the current batch script instead of
CMD.EXE. If executed from outside a batch script, it
will quit CMD.EXE

exitCode specifies a numeric number. if /B is specified, sets
ERRORLEVEL that number. If quitting CMD.EXE, sets the process
exit code with that number.

Has anyone found a workaround?

Re: dl 380 gen 10 showing error message while booting the windows 2016

pmetal — Sat, 23 Feb 2019 14:58:06 GMT

In the Perform maintenance ... go to BIOS/Platform

1) Inside this ---reset the BIOS and again install the OS

Re: dl 380 gen 10 showing error message while booting the windows 2016

sinfoni — Thu, 25 Apr 2019 20:46:53 GMT

thanks to pmetal for this solution. it worked for me !

Re: dl 380 gen 10 showing error message while booting the windows 2016

CanBEE — Wed, 17 Jul 2019 00:44:48 GMT

Thanks to pmetal from me too!

Re: dl 380 gen 10 showing error message while booting the windows 2016

Phil2815 — Fri, 12 Mar 2021 18:59:31 GMT

I had the same error on a Microserver Gen10 Plus. I overwrote the Inteligent Provisioning V3.50 with an older version 3.45 and it worked for me. I could install Windows Server 2019.

Re: dl 380 gen 10 showing error message while booting the windows 2016

OFred — Mon, 29 Mar 2021 17:12:36 GMT

Thanks ! Furthermore, I had to reset the smart array in the same menu, which was not very convenient..
Note that DL 360 gen 8 with IP 1.72 + Bios 05/2019 + iLO 2.77 + SmartArray firmware 8.32 supports very well "unofficially" Windows server 2019.

Re: dl 380 gen 10 showing error message while booting the windows 2016

AxeLinux — Thu, 29 Apr 2021 11:58:51 GMT

For those who still have the problem with Intelligent Provisioning version 3.50 and below, HP has released a "critical" patch that updates the intelligent provisioning to 3.62. This fixes the problem.
Here is the link: https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_c0a417ecd8ff486c8be8ef3f06

Re: dl 380 gen 10 showing error message while booting the windows 2016

KevinYeung — Tue, 06 Sep 2022 13:24:17 GMT

I encountered the same error message today during install Windows 2016 today.

Exit /b 0

Tried to reset the BIOS to default and re-create the array, re-install Win2016 - no luck

Called vendor support and help me updated the firmware, BIOS is running v2.64 (04/21/2022), reset BIOS, rebuild array but still fail

need urgent help on this. thanks

Kevin

Re: dl 380 gen 10 showing error message while booting the windows 2016

Sunitha_Mod — Wed, 07 Sep 2022 11:21:42 GMT

@KevinYeung

Hello Kevin,

Thanks for writing to us! Since you have posted in an old topic and there is no response yet, I would recommend you to create a new topic using the create "New Discussion" button, so the experts can check and assist you further.

Re: dl 380 gen 10 showing error message while booting the windows 2016

KevinYeung — Thu, 08 Sep 2022 08:21:32 GMT

Thank you, will do

Re: dl 380 gen 10 showing error message while booting the windows 2016

NdjououLouis — Tue, 13 Dec 2022 22:50:02 GMT

yes that helped to fix the issue .. and many thanks

Also, ensure that the IOMMU is disabled at the time you do the install / ....

From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Virtualization Options > AMD (R) IOMMU.

Enabling AMD virtualization options (hpe.com)