topic Re: HP Proliant DL360 Gen 10 Plus - Controller configuration in ProLiant Servers (ML,DL,SL)

HPE Proliant DL360 Gen 10 Plus - Controller configuration

Stepri — Tue, 20 Dec 2022 12:02:08 GMT

We purchased DL360 Gen 10 Plus Server with SAS Disk Drives. The S100i SR embedded controller obviously will not work with the SAS drives as its for SATA only. The server also has a slot MR416i controller, I have configured this as a RAID 6 with the four SAS 2.4TB drives. My issue is when I try and install an operating system on the server it indicates that there are no available drives. It seems like that it is still pointing to the S100i SR controller, is there a configuration I am missing to utilise the MR416i controller? Would the driver be pre-installed?

Any ideas would be really appreciate, thank you.

Query: HP Proliant DL360 Gen 10 Plus - Controller configuration

support_s — Wed, 09 Nov 2022 01:59:53 GMT

System recommended content:

1. HPE ProLiant DL360 Gen10 Plus Server - Overview

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

Re: HP Proliant DL360 Gen 10 Plus - Controller configuration

shiva_jr — Wed, 09 Nov 2022 04:41:12 GMT

Hi Stepri,

Since you are able to configure the RAID 6, I assume it has stable firmware version and RAID mode is enabled in HPSSA.
You get "Set bootable logical drive" option in HPSSA. Please choose the disk to be configured as logical drive.

Thank you !
Please mark as 'Accepted solution' if my post worked.
I work with HPE but opinions expressed here are mine.

Re: HP Proliant DL360 Gen 10 Plus - Controller configuration

msobers22 — Thu, 10 Nov 2022 20:14:06 GMT

Hello,

The MR416i cannot be configured using SSA. You must cnfigure the controller in System Utilities.

Access System Utilities by pressing F9 during POST
From the System Utilities screen, select System Configuration > HPE MR416i-a Gen10+
Select Main Menu
Configuration Management > Create Logical Drive
Select RAID Level
Select Drives > Apply Changes > Ok
Name the Logical Drive > Save Configuration
Check the Confirm box > Click on Yes - Ok

Hopefully this helps,

Re: HP Proliant DL360 Gen 10 Plus - Controller configuration

Stepri — Thu, 10 Nov 2022 22:12:45 GMT

Thank you, this resolved the issue, and was then able to use rapid set up to install Win Server 2016 operating system. Interesting that it wouldn't let me use the .iso for Win Server 2012 r2, however 2016 or 2019 was fine. I will test a 2012 r2 restore through server backup and see if it lets me do it this way.

Re: HP Proliant DL360 Gen 10 Plus - Controller configuration

Sunitha_Mod — Fri, 11 Nov 2022 03:52:57 GMT

Hello @Stepri,

Excellent!

We are glad to know the problem has been resolved.

Re: HP Proliant DL360 Gen 10 Plus - Controller configuration

EdmondT — Wed, 07 Dec 2022 06:52:25 GMT

@msobers22

Hi,

Apologies for haijacking the thread. I have face similar issue. I have follow the step to recreate logical drive in system ultilies but still no help only to see no driver found when installing windows server 2019. Help is needed and appreciated.

Thanks in advance

Re: HP Proliant DL360 Gen 10 Plus - Controller configuration

msobers22 — Wed, 07 Dec 2022 18:53:05 GMT

Hello,

Sorry for taking so long to respond. So let me make sure I understand.

You have a DL360 Gen10 Plus server with the MR 416 controller, right?

Have you configured the RAID and created a logical drive?

You are trying to install Windows Server?

Did you create a bootable USB from the iso?

Where exactly are you seeing the no driver found error?

Re: HP Proliant DL360 Gen 10 Plus - Controller configuration

abdulaziz93 — Mon, 12 Dec 2022 07:33:42 GMT

@msobers22 @shiva_jr Dear all,

facing the same issue.

I tried the steps shared. but still bad luck,

while I am making raid configuration using intelligent provisioning i cant see any of my drives.

and when going to install windwos same i face the issue

Re: HP Proliant DL360 Gen 10 Plus - Controller configuration

Joachim666 — Mon, 09 Jan 2023 08:28:34 GMT

same here, how did you guys get it sorted eventually ?

Re: HP Proliant DL360 Gen 10 Plus - Controller configuration

Just_Me1 — Thu, 10 Aug 2023 07:19:57 GMT

The problem is that the driver for the raid controller is not in the Windows installation iso. You should download the driver and put it on a stick and load it during the installation procedure.