topic Query: iLO Amplifier Pack NICs on VLAN in ProLiant Servers (ML,DL,SL)

iLO Amplifier Pack NICs on VLAN

wboyles — Fri, 20 Jan 2023 04:00:56 GMT

Hello,

Hoping someone could help or point me in the right direction. I'm trying to get the iLO Amplifier pack working on a Windows Hyper-V Cluster. No matter what I do, the NICs will not pull an IP address. Setting a static also doesn't work.

We are using a converged network so we're passing VLANs to the vSwitch and using tagging the VLAN on the VMs NIC. This is where it seems to be failing. I have tried on two separate clusters and it does the same thing. If I install on a standalone Hyper-V server with nothing but very basic networking then it pulls an IP immediately.

Am I missing something obvious or is this just not supported? If we had to add 1GB NICs to the servers that wouldn't be the end of the world to run this but I'd rather avoid that if possible.

Thank you!

Wayne

Query: iLO Amplifier Pack NICs on VLAN

support_s — Thu, 12 Jan 2023 16:29:23 GMT

System recommended content:

1. Advisory: HPE Integrated Lights-Out - High CPU Usage for iLO Amplifier Pack Version 1.80

2. iLO Amplifier Pack 2.16 User Guide

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

Re: iLO Amplifier Pack NICs on VLAN

TVVJ — Thu, 19 Jan 2023 09:25:55 GMT

Hello,

Please refer to this customer advisory and see if this is of any help to your issue.

Regards,