topic PL1600 in HPE ProLiant Servers (ML,DL,SL)

PL1600

Ron Collins_1 — Tue, 13 May 2003 06:54:01 GMT

Could anyone direct me to the link where I can download the latest System BIOS of my PL1600.

Thanks

Re: PL1600

Sunil Jerath — Tue, 13 May 2003 06:56:00 GMT

Hi Ron,
Please go to the following link and download the one which is appropriate to your Server since it came in two different versions i.e P08 & E34.

http://h18007.www1.hp.com/support/files/server/us/locate/20_1126.html#4

Regards,

Re: PL1600

Ron Collins_1 — Tue, 13 May 2003 06:58:15 GMT

Woa that's impressive. This was a quick response. Now one more question. Where should I go to download the latest firmware of my Smart Array 3200.

Many Thanks!!

Re: PL1600

Sunil Jerath — Tue, 13 May 2003 07:00:07 GMT

Hello Ron,
Here is the link to upgrade the firmware of SA3200:
http://h18007.www1.hp.com/support/files/server/us/download/14694.html

You need to make the first diskette only.

Cheers,

Re: PL1600

Ron Collins_1 — Tue, 13 May 2003 07:10:43 GMT

Sunil Thanks for your quick response. After updating the firmware of 3200 smart array I am getting a message during POST that the firmware of the following drives should be updated. I tried rebooting my server a couple of times but still getting same error message. Please advise as to how do I get rid of this annoying message.

Thanks

Re: PL1600

Sunil Jerath — Tue, 13 May 2003 07:14:35 GMT

Hello Ron,
This is normal when the Firmware of the HDDs is not upto par with the firmware of the Smart Array controllers. Please go to the following link and download the softpaq:

http://h18007.www1.hp.com/support/files/server/us/download/17149.html

This is 18MB softpaq and would require 10 disks atleast. Just make the very first diskette and cold boot your system with it. Once your system reads the diskettes it will direct you to the Diskette No which will be appropriate for your HDDs.
Hence you wont have to make all the 18MB worth of diskettes.

Regards,