topic Re: Gen10 - iSUT - ESXi - SUM in ProLiant Servers (ML,DL,SL)

Gen10 - iSUT - ESXi - SUM

PhS- — Tue, 18 Apr 2023 13:19:51 GMT

Hello,

Is there somewhere a comprensive guide that will help managing firmware for Gen10 servers running ESXi 7. I have tried to read the iSUT documentation (30-BBBC0B20-400) ... but it's not all clear to me.

I launched SUM on a windows machine ( from the ISO of Gen10 Service Pack for ProLiant , 2023.03.00). Then I had a host (Nodes) iving the IP of my ESXi installed on this DL380 Gen10. I get the following :

VMware server of generation post Gen9 identified Starting with Gen10 servers, updates to systems running ESXi are performed via the iLO maintenance interface. Please use iLO IP (xxx.xxx.xxx.xxx) and credentials to update this system.

So I proceed with adding Nodes, giving this time the iLO IP and I get :

Warning: Integrated Smart Update Tools was not running on the OS. If components are selected to install via an iLO install set that require installation in the OS then they will not run unless iSUT or Smart Update Manager are run.

But my VMware host has SUT installed :

[root@ESXiHOST:~] sut -status System Update Manager...................: OS Administrator Task Status.............................: Bios:N/A; LocalStorage:N/A; Deploy:Idle Staging Directory.......................: /tmp/stagingdirectory Baseline URI............................: None Baseline Version........................: Waiting for staging Mode of Operation.......................: AutoStage Polling Interval In Minutes.............: 5 Force Deploy............................: No Optional Components.....................: None EnableiLOQueuedUpdates..................: true User Action Needed......................: To perform firmware update, in OneView, import the server, create, and apply a server profile with baseline. In Compute Ops Management, connect the server to CoM and trigger an Update Firmware action. In iLO Amplifier Pack, import the server and perform Firmware Update. iLO Security Mode.......................: Production iLO CAC Smartcard Authentication........: Off iLO CAC Strict Mode.....................: Off

Where do I go from there ?

Query: Gen10 - iSUT - ESXi - SUM

support_s — Mon, 17 Apr 2023 08:56:31 GMT

System recommended content:

1. Synergy 480 gen 10 // ESXi 6.x & 7.x - "Unconfigured Disk : Disk Error" in Vcenter

2. HPE ProLiant DL360 Gen10 Server-HP FlexFabric 10Gb 2port 534FLR-SFP+ Adapter IS NOT WORKING AFTER ENABLING NPAR on esxi6.5 u2

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

Re: Query: Gen10 - iSUT - ESXi - SUM

PhS- — Mon, 17 Apr 2023 08:59:04 GMT

When BOTs fails miserably !!! exceptional answer to question I have never asked

Re: Gen10 - iSUT - ESXi - SUM

Cali — Mon, 17 Apr 2023 17:50:11 GMT

Maybe, my Article helps you:

HPE SPP Update with SUM and ESX (itrunde.de)

Cali

Re: Gen10 - iSUT - ESXi - SUM

TVVJ — Mon, 17 Apr 2023 18:09:55 GMT

Hello,

You may try the "Integrated Smart Update Tools 4.1.0 User Guide for Windows, Linux, and VMware ESXi" and see if this provide information that you require.

Regards,

Re: Gen10 - iSUT - ESXi - SUM

PhS- — Mon, 17 Apr 2023 19:10:27 GMT

@TVVJ I looked at the version 4.0.0 of this guide already. Didn't know there was a newer version .... but the documentation is ... let's say "as usefull as it is hard to find the correct version" ... (inho).

Re: Gen10 - iSUT - ESXi - SUM

PhS- — Mon, 17 Apr 2023 19:07:59 GMT

@Cali This is not bad, I just looked at it quickly and I will haver to try ... but better than what ever you cannot find on HPE wesite