topic Re: HP Rack and Power Manager 1.0 in ProLiant Servers (ML,DL,SL)

HP Rack and Power Manager 1.0

Eelco Kos — Thu, 15 May 2003 05:59:26 GMT

Hi,

I installed HP Rack and Power Manager on a Proliant 5500 (W2k). The services are started, but when I try to browse to it with https://hostname:3257, I get "Page cannot be displayed".
Does anyone have an idea to solve this problem ?

Re: HP Rack and Power Manager 1.0

NJK-Work — Fri, 16 May 2003 18:58:17 GMT

I know with iLO, you have to connect to http first, which then redirects you to https (this is for the certificates to match). Perhaps the RPM 1.0 requires you to connect to http instead of https and it then redirects you automatically...

Just a thought.
Nelson

Re: HP Rack and Power Manager 1.0

jan_31 — Wed, 11 Jun 2003 06:54:15 GMT

i had feedback from HP regional settings must be English(US) before installing

Re: HP Rack and Power Manager 1.0

Eelco Kos — Fri, 13 Jun 2003 13:05:02 GMT

Jan,

I got the same answer from HP/Compaq. I changed the regional settings and installed it again. In startmenu/Programs/HPRPM a shortcut was added to https://hostanme:3257/webpages/login.asp, but the link did not work. If I look with netstat -a nothing is listening or active on port 3257
If I get an anwser from HP/Compaq, I will post it here.

Re: HP Rack and Power Manager 1.0

Filip Laevens — Tue, 17 Jun 2003 13:07:05 GMT

hoi,

make sure that RPM is uninstalled before changing the regional settings

than change to "English US"
install RPM (you should have more than the uninstall icon)

you can change back your regional settings

connect to RPM via https://machinename:3257

this worked fine with us

grz