topic Re: SR S100i Cannot See SATA M.2 in ProLiant Servers (ML,DL,SL)

SR S100i Cannot See SATA M.2

Harrell0 — Thu, 29 Jun 2023 18:09:11 GMT

Hello

I have a DL325 Gen 10+ V2 Server with the Univeral STAT HH M.2 kit and 2 480GB SSDs installed. When the S100i is disabled the drives show as two SSDs. When the contollor is enabled it shows no drives in the system.

With the Univeral kit, what needs to be configured so that I can create a RAID 1 array with the SSDs?

Query: SR S100i Cannot See SATA M.2

support_s — Thu, 29 Jun 2023 15:04:11 GMT

System recommended content:

1. HPE Smart Array SR Gen10 Configuration Guide

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

Re: SR S100i Cannot See SATA M.2

Harrell0 — Thu, 29 Jun 2023 18:06:32 GMT

After speaking with HPE Support, when SATA M.2 SSDs are installed in the DL325 Gen10+ and V2 servers in the Unniversal SATA HH M.2 kit, the onboard SR100i Contollor cannot be used to configure a RAID array.

Here is the HPE document on the sbuject matter - https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=a00116197en_us

3 opitions are aviable for a solution

1 - Get drive trays and adapters and install in the front of the server

2 - Install another RAID Contoloor

3 - Install the HPE NS204i-p NVMe OS Boot Device.

Re: SR S100i Cannot See SATA M.2

Sunitha_Mod — Fri, 30 Jun 2023 04:04:33 GMT

Hello @Harrell0,

Perfect!

We are glad to know you were able to find the solution and we appreciate you for keeping us updated.