topic Query: HPE Intelligent Provisioning Job System Erase and Reset in ProLiant Servers (ML,DL,SL)

HPE Intelligent Provisioning Job System Erase and Reset

FarhanAhmed1 — Sun, 23 Jul 2023 13:42:21 GMT

Hi I have a Hp ProLiant DL360 Gen10 Server, I am facing a issue when I enter in HPE Intelligent Provisioning window it has start process autmatically system erase and reset job secure erasing, it has two checks inside system erase and reset one is secure erase and second is erase disk others have no checks and also not allowing to check and uncheck.

Need a solution for this it has taken too much time during this process.

Regards,

Farhan Ahmed

Query: HPE Intelligent Provisioning Job System Erase and Reset

support_s — Tue, 18 Jul 2023 16:43:10 GMT

System recommended content:

1. HPE Insight Control Server Provisioning 7.6 Administrator Guide

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

Re: HPE Intelligent Provisioning Job System Erase and Reset

TVVJ — Thu, 20 Jul 2023 12:21:40 GMT

Hello,

You may try re-installing Intelligent Provisioning and see if it helps. Click here for the software.

Regards,

Re: HPE Intelligent Provisioning Job System Erase and Reset

BPSingh — Thu, 20 Jul 2023 15:21:08 GMT

Greetings!

As advised above, update Intelligent provisioning to the latest version and check for the issue. If the issue persists, please log a support case for further investigation.

Re: HPE Intelligent Provisioning Job System Erase and Reset

Sunitha_Mod — Thu, 27 Jul 2023 07:13:01 GMT

Hello Farhan,

Let us know if you were able to resolve the issue.

If you have no further query and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.