topic How to use Patch Bundle for Gen10 SPP with iLO Amplifier Pack in ProLiant Servers (ML,DL,SL)

How to use Patch Bundle for Gen10 SPP with iLO Amplifier Pack

Christian664 — Thu, 31 Aug 2023 09:54:21 GMT

I use HPE Hardware Support Manager (HSM) plug-in for VMware vLCM to update my servers

In the iLO Amplifier I upload the SPP iso, no problem. But now there is a patch bundle for the SPP but the file is not a .iso but a .7z file

How do i use the Patch Bundle 7z with the iLO Amplifier?

Best Regards Christian

Re: How to use Patch Bundle for Gen10 SPP with iLO Amplifier Pack

Jags_21 — Thu, 31 Aug 2023 09:05:48 GMT

Hi Christian,

At present the iLO Amplifier does not support the patch bundle. Refer the latest release notes of the patch bundle for Gen10.

{Known Limitations:
Please note that the convenience bundles hosted on SPPCD portal are not VMware vSphere Lifecycle
Manager (VLCM) compatible and the same will be addressed in the future release of Gen11 Service Pack
for ProLiant.}

Release Notes link: Release Notes for Gen11 Patch Bundle for SPP 2023.04.00.00

Release Notes link: Release Notes for Gen10/Gen10 Plus Patch Bundle Version for SPP 2023.03.00.00

Rather you can follow the steps mentioned in the release notes on page number 5 to get the Custom SPP, and you can also check combination mentioned in below liink.

For Reference:

HPE SPP Custom Download User Guide

Hope this information helps you.

Thanks,

Re: How to use Patch Bundle for Gen10 SPP with iLO Amplifier Pack

Christian664 — Thu, 31 Aug 2023 10:01:30 GMT

Thank you

Didnt know about custom SPP download until now

Best Regards Christian