topic Re: Add HP 822608-B21 cage to existing Array B140i controller without losing Array data? in ProLiant Servers (ML,DL,SL)

Add HP 822608-B21 cage to existing Array B140i controller without losing Array data?

BillBrazeal — Thu, 04 Jan 2024 05:50:53 GMT

I have a ML30 Gen 9 server Running Windows 2016 Server. It has an Array configured and working fine but there was never a hot swap drive cage in the server. I now want to add the 822608-B21 cage to the server and re-install the existing drives into the hot swap cage. If I do that and keep the drives in the same order as they currently are, will the controller recognize the existing array and work as it did, keeping all the data, without having to rebuild the array?

Re: Add HP 822608-B21 cage to existing Array B140i controller without losing Array data?

Suman_1978 — Tue, 02 Jan 2024 05:23:30 GMT

Hi,

As per this article, The hot-plug drive cage only supports hot-plug drives. Non-hot-plug drives installed in a hot-plug drive cage will fail.

NOTE: It’s important to keep data backup before performing this activity.
Data integrity is customer responsibility. HPE recommends having data backup frequently and before performing any activity so that it can be restored during disaster recovery.

Thank You!
I work with HPE but opinions expressed here are mine.
HPE Tech Tips videos on How To and Troubleshooting topics

Re: Add HP 822608-B21 cage to existing Array B140i controller without losing Array data?

Tam92 — Tue, 02 Jan 2024 05:59:10 GMT

Hello,

The article shared in the last comment holds true for this.

The hot-plug drive cage allows accessing storage drives from the server front bezel. The hot-plug drive cage only supports hot-plug drives. Non-hot-plug drives installed in a hot-plug drive cage will fail.

Thanks,
TAM