topic Re: Enable Numa on DL380p Gen8 server in ProLiant Servers (ML,DL,SL)

Enable Numa on DL380p Gen8 server

와일드키드 — Wed, 31 Jul 2024 03:25:22 GMT

Hello,

I have old windows server HP DL380e G8.

i tried to check numa via Coreinfo64.exe. and the results are as below.

As s result, i thought that the numa was disabled in my Server. is it right?

So, how to enable numa in the system?

C:\>coreinfo64.exe

~~~

Processor signature: 000306E4

Logical to Physical Processor Map:
**---------------------------------------------- Physical Processor 0 (Hyperthreaded)
--**-------------------------------------------- Physical Processor 1 (Hyperthreaded)
----**------------------------------------------ Physical Processor 2 (Hyperthreaded)
------**---------------------------------------- Physical Processor 3 (Hyperthreaded)
--------**-------------------------------------- Physical Processor 4 (Hyperthreaded)
----------**------------------------------------ Physical Processor 5 (Hyperthreaded)
------------**---------------------------------- Physical Processor 6 (Hyperthreaded)
--------------**-------------------------------- Physical Processor 7 (Hyperthreaded)
----------------**------------------------------ Physical Processor 8 (Hyperthreaded)
------------------**---------------------------- Physical Processor 9 (Hyperthreaded)
--------------------**-------------------------- Physical Processor 10 (Hyperthreaded)
----------------------**------------------------ Physical Processor 11 (Hyperthreaded)
------------------------**---------------------- Physical Processor 12 (Hyperthreaded)
--------------------------**-------------------- Physical Processor 13 (Hyperthreaded)
----------------------------**------------------ Physical Processor 14 (Hyperthreaded)
------------------------------**---------------- Physical Processor 15 (Hyperthreaded)
--------------------------------**-------------- Physical Processor 16 (Hyperthreaded)
----------------------------------**------------ Physical Processor 17 (Hyperthreaded)
------------------------------------**---------- Physical Processor 18 (Hyperthreaded)
--------------------------------------**-------- Physical Processor 19 (Hyperthreaded)
----------------------------------------**------ Physical Processor 20 (Hyperthreaded)
------------------------------------------**---- Physical Processor 21 (Hyperthreaded)
--------------------------------------------**-- Physical Processor 22 (Hyperthreaded)
----------------------------------------------** Physical Processor 23 (Hyperthreaded)

Logical Processor to Socket Map:
************************------------------------ Socket 0
------------------------************************ Socket 1

Logical Processor to NUMA Node Map:
************************************************ NUMA Node 0

No NUMA nodes.

Thank you.

Re: Enable Numa on DL380p Gen8 server

Suman_1978 — Fri, 26 Jul 2024 03:13:08 GMT

Hi,

Please refer to the RBSU Guide on page# 139
Also this document.

Thank You!
I work with HPE but opinions expressed here are mine.

Re: Enable Numa on DL380p Gen8 server

Tam92 — Mon, 29 Jul 2024 07:40:03 GMT

Hello,

Please let me know if you got the required information which you were looking for?

Please refer to the RBSU Guide on page# 139
Also this document.

Thanks,
TAM

Query: Enable Numa on DL380p Gen8 server

support_s — Wed, 31 Jul 2024 09:08:24 GMT

Hello,

Let us know if you were able to resolve the issue.

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

Re : Query: Enable Numa on DL380p Gen8 server

와일드키드 — Tue, 06 Aug 2024 05:13:04 GMT

@Tam92 Hello,

Sorry for the delay.

Today, I checked what you guided me on my server (RBSU - Advanced Options).

After that i check again with coreinfo64.exe. however i don't find configuration for numa nodes.

Can you help me?

Thank you.

Re: Enable Numa on DL380p Gen8 server

와일드키드 — Tue, 13 Aug 2024 07:41:26 GMT

Today, I checked what you guided me on my server (RBSU - Advanced Options).
After that i check again with coreinfo64.exe. however i don't find configuration for numa nodes.

Can you help me?