topic HPE ProLiant DL360 Gen10 Server CHANGE DISKS IN RAD 1 WHITH BIGGER ONES in ProLiant Servers (ML,DL,SL)

HPE ProLiant DL360 Gen10 Server CHANGE DISKS IN RAD 1 WHITH BIGGER ONES

pasdil — Tue, 01 Oct 2024 08:14:11 GMT

Hi all, I just want to change the two 480GB disks configured as RAID1 on my HPE ProLiant DL360 Gen10 Server, on which is installed Hyper-V 2019 Operating System, with two new 980GB disk adn use the full space of the latter.

Which is the correct procedure to follow?

Thanks

Query: HPE ProLiant DL360 Gen10 Server CHANGE DISKS IN RAD 1 WHITH BIGGER ONES

support_s — Mon, 23 Sep 2024 16:25:31 GMT

System recommended content:

1. ProLiant DL360 Server Maintenance and Service Guide

2. Compaq ProLiant DL360 Ultra-Dense Server Deployment in Compaq Racks

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

Re: HPE ProLiant DL360 Gen10 Server CHANGE DISKS IN RAD 1 WHITH BIGGER ONES

Bunsol — Mon, 30 Sep 2024 06:07:51 GMT

Backup data, Delete the array and create new Raid 1 with the two new drives. Since the initial Raid 1 which was created with 480GB drive which means Raid was set to 480GB size limit so even if you swap one drive with the 980gb it will still consume only 480gb space from the 980. Hope this answers your query.

Query: HPE ProLiant DL360 Gen10 Server CHANGE DISKS IN RAD 1 WHITH BIGGER ONES

support_s — Tue, 08 Oct 2024 10:11:50 GMT

Hello,

Let us know if you were able to resolve the issue.

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.