topic Refresh ILO in ProLiant Servers (ML,DL,SL)

Refresh ILO

PeterYoung — Mon, 14 Oct 2024 03:47:01 GMT

ILO reported a faited drive in the array. A new drive was sent and replaced . However ILO is still showing the drive as failed. And it is continuing to show the S/N of the original drive, not the new one. How do I tell ILO to refresh its info?

Thanks

Query: Refresh ILO

support_s — Fri, 11 Oct 2024 17:59:30 GMT

System recommended content:

1. HPE iLO 5 1.40 User Guide | iLO Federation Group Power

2. HPE iLO 4 2.82 User Guide | Cookie sharing between browser instances and iLO

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

Re: Query: Refresh ILO

PeterYoung — Fri, 11 Oct 2024 20:14:17 GMT

Both links end in a request error

Re: Query: Refresh ILO

Marco Correnti Techno S — Sat, 12 Oct 2024 20:36:53 GMT

Both link are OK for me, anyway I can tell you that both have nothing in common with your problem, I think they are automatic suggestions ...

You could :

Reset ILO

If nothing is changed, try tp upgrade to the latest version of ILO.

If nothing is changed, try tp upgrade to the latest firmware of your Smart Array.

If nothing changes, make sure the disk inserted is not actually the one the ILO says it is..

Query: Refresh ILO

support_s — Fri, 18 Oct 2024 11:00:28 GMT

Hello,

Let us know if you were able to resolve the issue.

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.